Home Stock Firmware Samsung S10 Plus Japan (SCV42 SC-04L) Firmware – Full Repair

Samsung S10 Plus Japan (SCV42 SC-04L) Firmware – Full Repair

The specific Galaxy S10 Plus Japan Firmware Download Package comes with a Stock ROM of Galaxy S10 Plus Japan. This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung S10 Plus Japan (SCV42 SC-04L) Firmware – Full Repair

There are various reasons to flash “Stock Firmware on Galaxy S10 Plus Japan“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy S10 Plus Japan Stock ROM Details:

 FULL ROM SC04L DOWNLOAD
AP VERSION CSC VERSION code Type OS Size link google
SC04LOMU1BTE2 SC04LDCM1BTE2 DCM FULL 10 4,1G DOWNLOAD
SC04LOMU1BTB2 SC04LDCM1BTB2 DCM FULL 10 4,1G DOWNLOAD
SC04LOMU1BSLA SC04LDCM1BSLA DCM FULL 10 4,1G DOWNLOAD
SC04LOMU1ASJ6 SC04LDCM1ASJ6 DCM FULL OS9 3,8G DOWNLOAD
Advertisements
FULL ROM SCV42 DOWNLOAD
AP VERSION CSC VERSION code Type OS Size link google
SCV42KDU1BTE2 SCV42QDI1BTE2 KDI FULL 10 4,2G DOWNLOAD
SCV42KDU1BTB2 SCV42QDI1BTB2 KDI FULL 10 4,1G DOWNLOAD
SCV42KDU1ASJ6 SCV42QDI1ASJ6 KDI FULL OS9 3,9G DOWNLOAD
SCV42KDU1ASG1 SCV42QDI1ASG1 KDI FULL OS9 3,8G DOWNLOAD
SCV42KDU1ASF4 SCV42QDI1ASF4 KDI FULL OS9 3,8G DOWNLOAD
SCV42KDU1ASDB SCV42QDI1ASDB KDI FULL OS9 3,7G DOWNLOAD

How To Install Galaxy S10 Plus Japan Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy S10 Plus Japan Firmware[/highlight] files on your computer.

Advertisements

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

Advertisements

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy S10 Plus Japan finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy S10 Plus Japan Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.