Home Stock Firmware S10 Lite SM-G770F U3 Combination File – G770FXXU3ATG2

S10 Lite SM-G770F U3 Combination File – G770FXXU3ATG2

S10 Lite SM-G770F Binary 3 Combination File

An S10 Lite SM-G770F U3 Combination File is a test mode that does not have the effect of fixing the hardware but only the test function of the operation or damage.

However, a Combination file can recover IMEI, Baseband, or some software errors, but not all. By using a combination file, you will lose all features, including calls, play games, web history, and pictures. Etc.

S10 Lite SM-G770F Combination File Android 10 Q Binary 3 G770FXXU3ATG2

Samsung combination firmware (Samsung factory binary) and Samsung official firmware are provided in similar file names with little difference. Samsung combination firmware is being provided for repair purposes at Samsung service and Samsung official firmware for normal usage for Smartphone users.

The Advantages Of Combination File:

  • The technician or the developer can thoroughly read and test the equipment of the device and is considered as the service menu.
  • Downgrade Your device, and install software system Android version older than the current version.
  • Unlock the device protection with the Google Account Google FRP.
  • Fix the Root device key-DRK problem.
  • Fix the problems of stopping the Samsung device in the Recovery Mode.
  • Fix the problems of stopping Samsung devices in the Samsung logo.
  • Fixed problems with the IMEI serial number.

Pre-requirements:

  • Supported Phone: S10 Lite SM-G770F U3
  • Charge your mobile: You may charge no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Backup Android Phone
  • Download Odin Latest
  • Download and install the Samsung USB Driver

S10 Lite SM-G770F U3 Combination Firmware Details:

Model SM-G770F
Language Multi-Language
Android version Android 10 Q
PDA G770FXXU3ATG2
Date July / 2020
Revision 2
Size 1.8 GB

Combination File S10 Lite SM-G770F U3 Binary 3 Bit 3
COMBINATION_FAC_FAQ0_G770FXXU3ATG2_FACFAC_CL19269932_QB33101361_REV00

Advertisements
Download Google Drive Android File Host

How To Install S10 Lite SM-G770F U3 Combination File:

Download the Odin and Samsung USB Driver on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Combination File

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.

Advertisements

2: Download and extract the S10 Lite SM-G770F U3 Combination File files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

[highlight color=”yellow”] Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. [/highlight]

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the S10 Lite SM-G770F U3 Combination File.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

Advertisements

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Combination File process is completed, you will see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “S10 Lite SM-G770F U3 Combination File.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, the Combination File on S10 Lite SM-G770F U3 must have a 70–80% charge.

Previous articleGalaxy Note 8 SM-N950F U13 Firmware – N950FXXSDDTG1
Next articleS20 + SM-G985F U3 Combination File – G985FXXU3ATG7
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!