If you own a Galaxy S10 5G smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy S10 5G a security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy S10 5G Firmware Collection
Benefits of Updating Firmware
Flashing Stock Firmware on Galaxy S10 5G.” can resolve issues like your device being stuck on the logo or help in removing the FRP lock.
- Fix boot loop issue
- Update and Downgrade.
- Unroot or fix bugs
- To solve the lag or stutter.
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy S10 5G
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy S10 5G Stock Firmware:
Download Galaxy S10 5G Latest Firmware:
ALL ROM FULL G977B DOWNLOAD | |||||
LINK_GG | Model | VERSION | Code | OS | SIZE |
Full Rom | G977B | G977BXXU 2 ASHE | VD2 | OS9 | 3.8G |
Full Rom | G977B | G977BXXS 2 ASHB | VOD | OS9 | 3.8G |
Full Rom | G977B | G977BXXU 1 ASFC | TEL | OS9 | 4.1G |
ALL ROM FULL G977N DOWNLOAD | |||||
LINK_GG | Model | VERSION | Code | OS | SIZE |
Full Rom | G977N | G977NKSU 1 ASH3 | KOO | OS9 | 3.6G |
Full Rom | G977N | G977NKSU 1 ASF3 | SKC | OS9 | 3.9G |
Full Rom | G977N | G977NKSU 1 ASE7 | LUC | OS9 | 4.0G |
Full Rom | G977N | G977NKSU 1 ASDB | SKC | OS9 | 3.9G |
ALL ROM FULL G977P DOWNLOAD | |||||
LINK_GG | Model | VERSION | Code | OS | SIZE |
Full Rom | G977P | G977PVPU 2 ASH6 | SPR | OS9 | 3.9G |
Full Rom | G977P | G977PVPU 1 ASF4 | SPR | OS9 | 3.9G |
How To Flash Samsung Stock Firmware With ODIN
1: Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
2: Download and extract the Galaxy S10 5G Firmware on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
- Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. For a new phone, use this guide.
5: When Yellow Triangle Sign Appears . Press the Volume Up key to proceed.
6: Launch the Odin flash tool. Next, connect your phone to the pc.
7: Odin will recognize the device and show the “Added” message in the lower left panel.
8: click the PDA button and select the Galaxy S10 5G Firmware.tar file.
9: Click the Start button.
10: Flashing typically takes about 5 minutes to complete.
After the process finishes, you will see a Green Box with Pass in Odin. And phone will then reboot automatically.
To verify the installed firmware, go to Settings → About Phone → Software Information. Check the firmware number under Baseband version.
Troubleshooting:
If issues arise during the firmware update, here are some troubleshooting steps:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you keep facing issues, your device might require a factory reset.