At some point, while using S-TELL P790, you’ll probably encounter a situation in which you need to flash S-TELL P790 Firmware File. You might need an S-TELL P790 stock ROM how do you make sure the flashing process goes off without a hitch?
That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash stock ROM of your S-TELL P790 and set up on a new Firmware.
S-TELL P790 Stock Rom is the software which is provided by the vendor or You may say that the software. which was installed by the manufacturer of the phone is Stock Rom. the other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire.
Flashing an S-TELL P790 Firmware means installing the system image into the device’s internal flash memory. Flash memory holds Android’s firmware. the same as most other portable devices with an embedded OS.
We will use the SPD Download Tool to unbrick the Spreadtrum Devices With S-TELL P790 Flash File. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your SPD Phone.
The Benefit Of S-TELL P790 Stock Firmware:
- Flash Stock To Unbrick your S-TELL P790
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
S-TELL P790 Stock ROM Details:
Download S-TELL P790 Flash File
|Device Supported||S-TELL P790|
|Tool Supported||SPD Flash Tool|
Pre-requirements to Install S-TELL P790 Firmware:
- Supported Phone: S-TELL P790
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take S-TELL P790 Backup:
S-TELL P790 Flashing Tool And Drivers:
- Please Read and understand the Full Guide Before Flashing S-TELL P790 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Bin Packet load Error When Flashing S-TELL P790 Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI After Flashing S-TELL P790 Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
Instructions to Install S-TELL P790 Firmware:
- Install Spreadtrum Drivers.
- Install the SPD Download Tool.
- Open the Research download tool > bin folder.
- Launch ResearchDownload.exe.
- Click on the Load Packet icon (top left corner).
- In the window that pops up, navigate to the location of the S-TELL P790 Firmware.pac file, select it then click Open.
- The PAC file should now be loaded (its name should appear at the top).
- Click the Settings Icon (top left corner).
- In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
- Click the Start downloading button.
- You should see Waiting…. under the Progress bar.
- Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
- Once flashing is complete, you’ll see Passed.
- Click on the Stop downloading icon then disconnect the phone from PC and boot.
Follow Detailed Instruction S-TELL P790 Firmware Flashing With Spd Flash Tool.