Walton

How To Flash Walton Primo E6 Firmware [Stock ROM]

Walton Primo E6 Firmware

The specific Walton Primo E6 Firmware comes with a Stock ROM of Walton Primo E6. This helps you to bypass FRP lock and revert form root and custom ROM.

The Walton Primo E6 (PRE6) smartphone released in 2015. It is powered by Spreadtrum SC7731G chipset, 1 GB of RAM and 8 GB of internal storage.

The Walton Primo E6 runs on Android OS v5.1 (Lollipop) out of the box. It comes with a Li-Ion 1650 mAh battery. It features a 4.5 inches TFT display with 480 x 854 px resolution. A thin-film-transistor (TFT) LCD display is a variant of a liquid-crystal display (LCD).

Walton Primo E6 Firmware Flash File [Stock ROM]

There are various reasons to flash (Firmware on Walton Primo E6).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Walton Primo E6 Firmware:

  • Flash Stock ROM to unbrick your Walton Primo E6
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements To Flash Walton Primo E6 Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Walton Primo E6 Full Backup

Before going to install Walton Primo E6 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Walton Primo E6 Flash Tool And Drivers:

A.  Download and install Walton Primo E6 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Spreadtrum flash tool for as Walton Primo E6 Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Walton Primo E6 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download Walton Primo E6 stock ROM (PAC) file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add Walton Primo E6 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Walton Primo E6 Stock ROM using SPD Flash tool.

Disclaimer:

  • Please read and understand the Full guide before flashing “Walton Primo E6 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on Walton Primo E6 must have a 70–80% charge.

Bin Packet load Error When Flashing “Walton Primo E6 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Walton Primo E6 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Walton Primo E6 Firmware Details:

Disadvantage

Gapps: Included No Root
Device Supported: Walton Primo E6 No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: SC7731G No ADB Ad Block
Os: Android 5.1 Pre-installed OEM apps

Download

Tags

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top button
Close