If you’re looking for the Vivo X5 Max S Firmware you need to flash, it can sometimes be difficult to locate online. For Vivo X5 Max S. In this Article/Tutorial about Unbrick Vivo X5 Max S. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops.

I hope This Tutorial Will Help You To Unbrick Vivo X5 Max S Mediatek Based Devices.

This article contains the Vivo X5 Max S Firmware Flash File. That will allow you to recover your Vivo X5 Max S mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

How To Flash Vivo X5 Max S Firmware File [ROM]

The Advantages Vivo X5 Max S Firmware:

• Flash Stock To Unbrick your Vivo X5 Max S
• Fix boot loop issue
• Update and Downgrade Vivo X5 Max S
• Unroot or Fix Bugs
• To solve the lag or stutter on Vivo X5 Max S
• Fix software issues.
• Return to stock for warranty coverage.

Vivo X5 Max S Firmware Details:

• Gapps File: Included
• Device Supported: Vivo X5 Max S
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6752
• Os: Android

Download

• Vivo_X5_Max_S_PD1424L_MT6752_16062015.zip

Pre-requirements to Install Vivo X5 Max S Firmware:

• Supported Phone: Vivo X5 Max S
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • First Create a copy of your Call Log – Contacts – Sms – Etc With G Backup
  • Second Make a duplicate of current Vivo X5 Max S Firmware With MTK Droid Tool
  • Third backup Vivo X5 Max S IMEI NVRAM

Download Vivo X5 Max S Flashing Tool And Drivers:

• Vivo X5 Max S Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Vivo X5 Max S VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please read and understand the Full Guide Before Flashing Vivo X5 Max S Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• In addition, Make sure that the USB drivers for your device are installed on the computer.
• Before flashing, Stock ROM Vivo X5 Max S must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Advertisements

Instructions to Install Vivo X5 Max S Firmware:

1. First Of All Extract And Run SP flash tool.
2. Also, Install MTK Android USB drivers.
3. Then download Vivo X5 Max S Firmware.
4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
5. Now open the SP flash tool.exe.
6. Afterward, go to the download button in the SP flash tool.
7. Next In the download tab, click on the scatter load button at the right.
8. After locating the scatter tab, click on the download button on the top left.
9. Immediately connect your smartphone with a USB cable, and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
10. When flashing is completed, finally a green ring will appear in the SP flash tool.
11. Close the SP flash tool on your computer and unplug the phone.
12. Power on the phone and enjoy it.
13. After the flashing process starts, it might take up to 5–10 minutes surely. So keep patience and wait.