If you have a VIVK R3 smartphone and you want VIVK R3 Firmware. To solve your bricked device, then you definitely are in the best article/post.

We will guide for you to install the official VIVK R3 Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the VIVK R3 Flash File below. Download the Stock ROM file to repair your VIVK R3.

Advertisement

VIVK R3 Firmware

This article contains the VIVK R3 Firmware Flash File. That will allow you to recover your VIVK R3 mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the VIVK R3. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your VIVK R3.

[quads id=2]

The Advantages Of Stock Firmware:

  • Flash Stock To Unbrick your VIVK R3
  • Fix boot loop issue
  • Update and Downgrade VIVK R3
  • Unroot or Fix Bugs
  • To solve the lag or stutter on VIVK R3
  • Fix software issues.
  • Return to stock for warranty coverage.

VIVK R3 Firmware Details:

  • Gapps File: Included
  • Device Supported: VIVK R3
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 6.0 Marshmallow

Download

VIVK R3 Firmware MT6580 6.0.zip

[quads id=2]

Pre-requirements to Install VIVK R3 Firmware:

  • Supported Phone: VIVK R3
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Download VIVK R3 Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing VIVK R3 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM VIVK R3 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install VIVK R3 Firmware:

  1. First Of All Extract And Run SP flash tool.
  2. Also, Install MTK Android USB drivers.
  3. Then download VIVK R3 Firmware.
  4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
  5. Now open the SP flash tool.exe.
  6. Afterwards, go to download button in SP flash tool.
  7. Next In the download tab, click on the scatter load button at the right.
  8. After locating the scatter tab, click on the download button on top left.
  9. Immediately connect your smartphone with a USB cable, and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, finally a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes surely. So keep patience and wait.

Follow Detailed Instruction VIVK R3 Firmware Flashing With Sp Flash Tool.