UMIDIGI A11 Tab Firmware

If your UMIDIGI A11 Tab phone is corrupt or bricked. Download UMIDIGI A11 Tab stock firmware from here. To get it back to a working condition again. 

Advertisement

All you have to do is simply download the below-given UMIDIGI A11 Tab firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on UMIDIGI A11 Tab using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

Download Firmware/Flash File For UMIDIGI A11 Tab MT8768 11.0:

There are various reasons to flash (Firmware on UMIDIGI A11 Tab).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  •  Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download UMIDIGI A11 Tab Flash Tool And Drivers:

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Sp flash tool for as UMIDIGI A11 Tab Flash Tool because of this tool is very efficient and support all kind of MTK phones.

Firmware Information:

Device Name: UMIDIGI A11 Tab
Type: Full ROM
Size: up to 1.4GB
SoC: MT8768
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: 
UMIDIGI_A11_Tab_V1.0_20211029

[quads id=2]

Download Firmware UMIDIGI A11 Tab EU
Firmware UMIDIGI A11 Tab GLO

Instructions to Flash UMIDIGI A11 Tab Stock ROM:

1. First of all Download the ‘UMIDIGI A11 Tab flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

UMIDIGI A11 Tab Firmware Flash File [MT8768 11.0]

4. Now go to the sp flash tool extract folder and launch it.

UMIDIGI A11 Tab Firmware Flash File [MT8768 11.0]

5. As soon as the SP Flash tool is launched, click on the Download tab.

UMIDIGI A11 Tab Firmware Flash File [MT8768 11.0]

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

UMIDIGI A11 Tab Firmware Flash File [MT8768 11.0]

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

  • That’s it. Now you’ve successfully flashed stock ROM on your UMIDIGI A11 Tab.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”UMIDIGI A11 Tab Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.