If you’re looking for the iTel IT1655 firmware you need to flash, it can sometimes be difficult to locate online. For iTel IT1655. In this Article/Tutorial about Unbrick iTel IT1655 . and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops.
I hope This Tutorial Will Help You To Unbrick iTel IT1655 MTK Based Devices. This article contains the iTel IT1655 Firmware Flash File. That will allow you to recover your iTel IT1655 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
How To Flash iTel IT1655 Firmware File:
We will use the Sp Flash Tool to unbrick the iTel IT1655. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your iTel IT1655.
The Advantages iTel IT1655 Firmware:
- Flash Stock To Unbrick your iTel IT1655
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade iTel IT1655
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter on iTel IT1655
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
iTel IT1655 Firmware Details:
- Gapps File: Included
- Device Supported: iTel IT1655
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6572
- Os: Android
Pre-requirements to Install iTel IT1655 Firmware:
- Supported Phone: iTel IT1655
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take Phone Backup:
iTel IT1655 Flashing Tool And Drivers:
- iTel IT1655 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- iTel IT1655 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
- Please read and understand the Full Guide Before Flashing iTel IT1655 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install iTel IT1655 Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download iTel IT1655 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction iTel IT1655 Firmware Flashing With Sp Flash Tool.