Galaxy A8 2018 SM-A530F Binary 11 Firmware [Stock ROM]

Galaxy A8 2018 SM-A530F Binary 11

The specific Galaxy A8 2018 SM-A530F Binary 11 Stock Firmware Download Package comes with a Stock ROM of Galaxy A8 2018 SM-A530F U11 Security Patch Level 2020-03-01 (1 March 2020)
. This helps you to bypass FRP lock and revert form root and custom ROM.

Why would you want to flash Firmware on your Galaxy A8 2018 SM-A530F Binary 11?

There are various reasons to flash “Stock Firmware on Galaxy A8 2018 SM-A530F Binary 11“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements to Install Galaxy A8 2018 SM-A530F Binary 11 Stock ROM

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing or updating the firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

How To Install Galaxy A8 2018 SM-A530F Binary 11 Firmware Update

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A8 2018 SM-A530F Binary 11 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A8 2018 SM-A530F Binary 11 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on must have a 70–80% charge.
Model SM-A530F U11, S11, Binary 11, Bit 11
Region / Country Brazil
Language Multi-Language
A version of Android 9 Pie
Operator Operator Cleans ZTO (without logo, operator apps)
PDA A530FXXSBCTC1
CSC A530FOXMBCTC1
Product code ZTO
Build Date 03 Mar 2020
Security Patch Level 2020-03-01 (1 March 2020)

Downloads |    4File    Google Drive     Android File Host