Home Stock Firmware Evertek EverTrendy Firmware Flash File

Evertek EverTrendy Firmware Flash File [Stock ROM]

Evertek EverTrendy Firmware

In this article, you will learn  How you can install Evertek EverTrendy Firmware. So if you are in this article, then either your phone is working properly. You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system.

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Evertek EverTrendy Stock ROM, USB drivers, and flash tool that is in it.

Evertek EverTrendy Stock ROM – How To Flash Guide

The Advantages Of Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software error. Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM through recovery or with SP Flash Tool.

If your Evertek EverTrendy device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Pre-requirements:

Evertek EverTrendy Firmware Details:

  • Device Name: Evertek EverTrendy
  • Type: Full ROM
  • SoC: Mediatek MT6572
  • Os: Android 10
  • Password: Null
  • Root access: Not
  • Gapps: Included
  • Firmware Version: Evertek_EverTrendy_MT6572_17092013
[quads id=2]
Download Firmware/Flash File

Instructions to Install Evertek EverTrendy Firmware:

Download the Sp Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Sp Flash tool.

Guide to Install Stock ROM using Sp Flash Tool:

Download the Evertek EverTrendy stock ROM zip file given above and extract it on your computer.

2. Download the USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start the flashing process.

9. Next, join your Android device to your computer using the unique USB cable (without battery – whether it is battery removable) and press the volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Android device.

Follow Detailed Instruction Stock Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Ensure charged you phone at 70–80%.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your Evertek EverTrendy Firmware before you flash a new unknown ROM.

Exit mobile version