CityCall Life Pro 7 Firmware Flash File [Stock Rom]

0
208

Official Stock CityCall Life Pro 7 Firmware. If you have CityCall Life Pro 7 Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.CityCall Life Pro 7 Firmware Flash File [Stock Rom] This article contains the CityCall Life Pro 7 Firmware Flash File. That will allow you to recover your CityCall Life Pro 7 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

CityCall Life Pro 7 Firmware Flash File [Stock Rom]

We will use Sp Flash Tool to unbrick the CityCall Life Pro 7. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your CityCall Life Pro 7.

Advertisment

The Advantages CityCall Life Pro 7 Firmware:

  • Flash Stock To Unbrick your CityCall Life Pro 7
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade CityCall Life Pro 7
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on CityCall Life Pro 7
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

CityCall Life Pro 7 Firmware Details:

  • Gapps File: Included
  • Device Supported: CityCall Life Pro 7
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6582 – MT6580
  • Os: Android 7.0 Nougat

Download

CityCall_Life_Pro_7_MT6580_20180104_7.0.zip

Advertisment

Pre-requirements to Install CityCall Life Pro 7 Firmware:

  • Supported Phone: CityCall Life Pro 7
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Download CityCall Life Pro 7 Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing CityCall Life Pro 7 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install CityCall Life Pro 7 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download CityCall Life Pro 7 Firmware.
  4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in the SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in the SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Karbonn Yuva 2 Firmware

Follow Detailed Instruction CityCall Life Pro 7 Firmware Flashing With Sp Flash Tool.

LEAVE A REPLY

Please enter your comment!
Please enter your name here