First of all download Official Stock Citycall Life 10 Pri Firmware. If you have Citycall Life 10 Pri Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.
This article contains the Citycall Life 10 Pri Firmware Flash File. That will allow you to recover your Citycall Life 10 Pri mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
Citycall Life 10 Pri Firmware Flash File [Stock Rom]
We will use Sp Flash Tool to unbrick the Citycall Life 10 Pri. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Citycall Life 10 Pri.
The Advantages Citycall Life 10 Pri Firmware:
- Flash Stock To Unbrick your Citycall Life 10 Pri
- Fix boot loop issue
- Update and Downgrade Citycall Life 10 Pri
- Unroot or Fix Bugs
- To solve the lag or stutter on Citycall Life 10 Pri
- Fix software issues.
- Return to stock for warranty coverage.
Citycall Life 10 Pri Firmware Details:
- Gapps File: Included
- Device Supported: Citycall Life 10 Pri
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6580
- Os: Android 7.0 Nougat
Download
Citycall_Life_10_Pri_MT6580_20180130_7.0.zip
Pre-requirements to Install Citycall Life 10 Pri Firmware:
- Supported Phone: Citycall Life 10 Pri
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
Download Citycall Life 10 Pri Flashing Tool And Drivers:
- Citycall Life 10 Pri Flash Tool: Download the latest SP Flash tool and extract it (Install)
- Citycall Life 10 Pri VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please Read and understand the Full Guide Before Flashing Citycall Life 10 Pri Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install Citycall Life 10 Pri Firmware:
- Extract And Run SP flash tool.
- Install MTK android USB drivers.
- Then download Citycall Life 10 Pri Firmware.
- Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
- Now open SP flash tool.exe.
- When SP flash tool open, go to download button in the SP flash tool.
- In the download tab, click on the scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in the SP flash tool.
- Close SP flash tool on your computer and unplug the phone.
- Power on the phone and enjoy.
- After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction Citycall Life 10 Pri Firmware Flashing With Sp Flash Tool.