We are going to Flash Aprix Tab 64 Firmware. In this guide, we have used the SP Flash Tool to flash the Aprix Tab 64 Stock ROM. And we include the Official link to Download Aprix Tab 64 Stock ROM and all Needed Files.  For example, your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

Aprix Tab 64 Firmware


This article contains the Aprix Tab 64 Firmware Flash File. That will allow you to recover your Aprix Tab 64 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

How To Flash Aprix Tab 64 Firmware File [ROM]

We will use Sp Flash Tool to unbrick the Aprix Tab 64. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Aprix Tab 64.


The Advantages Aprix Tab 64 Firmware:

  • Flash Stock To Unbrick your Aprix Tab 64
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Aprix Tab 64
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Aprix Tab 64
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Aprix Tab 64 Firmware Details:

  • Gapps File: Included
  • Device Supported: Aprix Tab 64
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT8163
  • Os: Android 6.0 Marshmallow


Aprix Tab 64 Firmware MT8163 6.0.zip


Pre-requirements to Install Aprix Tab 64 Firmware:

  • Supported Phone: Aprix Tab 64
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Download Aprix Tab 64 Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Aprix Tab 64 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Aprix Tab 64 Firmware:

  1. First Of All Extract And Run SP flash tool.
  2. Also, Install MTK Android USB drivers.
  3. Then download Aprix Tab 64 Firmware.
  4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
  5. Now open the SP flash tool.exe.
  6. Afterward, go to download button in SP flash tool.
  7. Next In the download tab, click on the scatter load button at the right.
  8. After locating the scatter tab, click on the download button on top left.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, finally a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes surely. So keep patience and wait.

Black Fox B4 Firmware

Follow Detailed Instruction Aprix Tab 64 Firmware Flashing With Sp Flash Tool.