Qnet Levin V1 Stock ROM Firmware Flash File

Qnet Levin V1 Stock ROM Firmware Flash File

If you’re looking for the Qnet Levin V1 Stock ROM Firmware Flash File, it can sometimes be difficult to locate online. For Qnet Levin V1. In this Article/Tutorial about Unbrick Qnet Levin V1 and download flash files tested and working file.

I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Qnet Levin V1 basically Mediatek Based Devices.

Qnet Levin V1 Stock ROM Firmware Flash File

We will useSp Flash Tool to unbrick the Qnet Levin V1. This tool is really very efficient. Just follow the step by step procedure to use Smart Phone Flashing Tool and Flash Stock ROM on your Qnet Levin V1.

The Benefit Qnet Levin V1 Of Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Qnet Levin V1 is stuck in a boot loop, and as the name implies, is caused by a software error on Qnet Levin V1, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Qnet Levin V1 through recovery or with SP Flash Tool. If your Qnet Levin V1 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Firmware Details:

  • Gapps File: Included
  • Device Supported: Qnet Levin V1
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6580
  • Os: Android 6.0 Marshmallow
Download File Description
Download Qnet Levin V1 MT6580 6.0 Firmware.zip

[the_ad id=’190809′]


Pre-requirements to Install Stock Firmware on Qnet Levin V1:

  • Supported Phone: Qnet Levin V1
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Qnet Levin V1 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Qnet Levin V1:

[sc name=”MTK2″]