Home Stock Firmware QMobile Qmobile X30 Firmware Flash File

Qmobile X30 Firmware Flash File [Stock ROM]

If your Qmobile X30 device is corrupt or bricked. Free download Qmobile X30 mt6572  firmware file with scatter from here. (based on your device model number) and flash it on your smartphone or tablet.

After a hard reset, Qmobile X30 restart problem to get it back to a working condition again. In this post, we share Qmobile X30 official Flash file we test this ROM on many phones it,s work well without USB pinout. To download the official firmware of Qmobile X30 and flash with any chines Mobiles flashing tool or box.

Qmobile X30 FirmwareThe Qmobile X30 is Run on Android 4.0 OS Powered by MediaTek MT6572 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

How To Flash Qmobile X30 Firmware Firmware File [ROM]

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Qmobile X30 Firmware Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Qmobile X30 Firmware Firmware.

3. And in the last part, we will guide you How to flash this Qmobile X30 Firmware ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

[quads id=2]

The Advantages Of Qmobile X30 Firmware Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Qmobile X30 Firmware stock ROM on Qmobile X30 Firmware through recovery or with SP Flash Tool.

If your Qmobile X30 Firmware device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Qmobile X30 Firmware Stock ROM Details:

Download Qmobile X30 Firmware Flash File:

Gapps File: Included
Device Supported: Qmobile X30 Firmware
Tool Supported: SP Flash Tool
Processor: MediaTek
Os: Android
Download: Wiko_Tommy_V19.zip

[quads id=2]

Pre-requirements to Flash Qmobile X30 Firmware Stock Firmware File:

  • Supported Phone: Qmobile X30 Firmware
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Qmobile X30 Firmware Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Qmobile X30 Firmware Flash Tool And Drivers:

A.  Download and install Qmobile X30 Firmware Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Qmobile X30 Firmware Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Qmobile X30 Firmware.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Qmobile X30 Firmware.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Qmobile X30 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Qmobile X30 Firmware must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Qmobile X30 Firmware Firmware File:

1. Download Qmobile X30 Firmware flash file zip file given above and extract it in your computer.

2. Download Qmobile X30 Firmware USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Qmobile X30 Firmware smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Qmobile x30 scatter file” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Qmobile X30 Firmware Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Qmobile X30 Firmware Android device.

Follow Detailed Instruction Qmobile X30 Firmware Firmware Flashing With Sp Flash Tool.

Exit mobile version