QMobile Noir J2 Secure Boot DA File

Format A Single Partition In QMobile Noir J2 using QMobile Noir J2 Secure Boot DA File. This is a step by step guide showing how to format a single partition of an QMobile Noir J2 using SP flash tool.

Advertisement

Why would I want to format a single partition on my QMobile Noir J2?

There are different causes why one might want to format a single partition on an QMobile Noir J2. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Note:

1. open folder

2. extract flash tool and open flash tool

3. select da file in FRP folder

4. select scatter file

5. formate with FRP address ( 0x2d88000 0x100000 )

6. FRP done but dl image failed to show your screen

7. fix dl image failed flash with cache file job done.

FRP address
0x2d88000
0x100000

Requirements to format one single partition on my QMobile Noir J2:

  • Supported Phone: QMobile Noir J2
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take QMobile Noir J2 Backup:

Download QMobile Noir J2 Flashing Tool And Drivers:

QMobile Noir J2 Secure Boot DA File Detail:

  • File Name: S4 IX626B Boot DA
  • Device Supported: QMobile Noir J2
  • Tool Supported: Sp Flash Tool

Download

[quads id=2]

How to Format a Single Partition of QMobile Noir J2:

1. The steps below explain how to format a single partition of an QMobile Noir J2 using the SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of QMobile Noir J2

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of QMobile Noir J2

4. In the windows that appear next, navigate to and select the QMobile Noir J2 scatter file.

select the QMobile Noir J2 scatter file

5. You should now be taken back to the SP flash tool window, click on the Format tab.

QMobile Noir J2 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

QMobile Noir J2 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

QMobile Noir J2 Secure Boot DA File [Format Single Partition]

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

QMobile Noir J2 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length
QMobile Noir J2 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

QMobile Noir J2 Secure Boot DA File [Format Single Partition]

11. Now you can boot up the QMobile Noir J2.

Disclaimer:

  • Once the SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the QMobile Noir J2 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full QMobile Noir J2 stock ROM to revive the phone.
  • Avoid using a random QMobile Noir J2 scatter file (even though its for your chipset) in the Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.