Peace PXP201 Firmware

 

Advertisement

in this article, you will learn how you can flash the Peace PXP201 Firmware file. The Stock ROM file is free to download without any password. And this file is tested many users and working fine

However, if you do not like the custom ROMs you have installed and want to go back to the original operating system.

 

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Peace PXP201 Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Peace PXP201 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Peace PXP201 Firmware.

3. And in the last part, we will guide you How to flash this Peace PXP201 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

[quads id=2]

The Advantages Of Peace PXP201 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Peace PXP201 stock ROM on Peace PXP201 through recovery or with SP Flash Tool.

If your Peace PXP201 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Peace PXP201 Stock ROM Details:

Download Peace PXP201 Flash File:

Gapps File: Included
Device Supported: Peace PXP201
Tool Supported: SP Flash Tool
Processor: MediaTek MT6572
Os: Android 4.4.2
Download: Peace PXP201 MT6572 4.4.2.zip

[quads id=2]

Pre-requirements to Flash Peace PXP201 Stock Firmware File:

  • Supported Phone: Peace PXP201
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Peace PXP201 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Peace PXP201 Flash Tool And Drivers:

A.  Download and install Peace PXP201 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Peace PXP201 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Peace PXP201.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Peace PXP201.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Peace PXP201.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Peace PXP201 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Peace PXP201 Firmware File:

1. Download Peace PXP201 flash file zip file given above and extract it in your computer.

2. Download Peace PXP201 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Peace PXP201 smartphone and take away the battery (it’s removable).

Switch Off Peace PXP201

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Peace PXP201 Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

How To Flash Peace PXP201 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Peace PXP201 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Peace PXP201 Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Peace PXP201 Firmware

9. Next, join your Peace PXP201 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Peace PXP201 Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Peace PXP201 Android device.

Follow Detailed Instruction Peace PXP201 Firmware Flashing With Sp Flash Tool.