Peace P4 Firmware Flash Files [Stock Lollipop ROM]

Today I will share Peace P4 firmware flash file without password. Both version MT6580 and MT6572 ROM files are totally free t download with password.

The Peace P4 is Run on Android 5.1 Lollipop OS Powered by MediaTek MT6580 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

How To Flash Peace P4 Firmware Firmware File [ROM]

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Peace P4 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Peace P4 Firmware Firmware.

3. And in the last part, we will guide you How to flash this Peace P4 Firmware ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

The Advantages Of Peace P4 Firmware Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Peace P4 Firmware Stock ROM on Peace P4 Firmware through recovery or with SP Flash Tool.

If your Peace P4 Firmware device turns to a soft-brick, it may:

• Keeps Rebooting;
• Boots Straight Into Recovery;
• Boots Straight Into its Bootloader;
• Freeze at the startup screen or boot Animation;

Peace P4 Firmware Stock ROM Details:

Download Peace P4 Firmware Flash File:

Gapps File:	Included
Device Supported:	Peace P4 Firmware
Tool Supported:	SP Flash Tool
Processor:	MediaTek  MT6580
Os:	Android 5.1 Lollipop
Download:	Peace P4 Firmware MT6580 5.1.zip Peace_P4_MT6572_20170426_6.0.zip Peace_P4_MT6572_20180704_4.4.2.zip

Pre-requirements to Flash Peace P4 Firmware Stock Firmware File:

• Supported Phone: Peace P4 Firmware
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

1. Take Peace P4 Firmware Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

---

2. Download Peace P4 Firmware Flash Tool And Drivers:

A.  Download and install Peace P4 Firmware Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Peace P4 Firmware Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Peace P4 Firmware.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Peace P4 Firmware.
Disclaimer:

• Please read and understand the Full Guide Before Flashing Peace P4 Firmware.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Before flashing, Stock ROM Peace P4 Firmware must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Advertisements

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Peace P4 Firmware Firmware File:

1. Download Peace P4 Firmware flash file zip file given above and extract it in your computer.

2. Download Peace P4 Firmware USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Peace P4 Firmware smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Peace P4 Firmware Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Peace P4 Firmware Android device.

Follow Detailed Instruction Peace P4 Firmware Firmware Flashing With Sp Flash Tool.