How to Pair and Use the Haylou S35 ANC

In this tutorial, we will show you step-by-step how to pair the Haylou S35 ANC headphones with Android, iOS, Windows and Linux computers. Also, the tutorial shows you how to use touch controls and troubleshoot connection issues by teaching you how to do a factory reset.

The Haylou S35 ANC headphones are an excellent choice for anyone looking for a quality audio experience with active noise cancellation and freedom of movement. In order to take advantage of these features, it is necessary to pair the headphones with the device. For this, check out the step-by-step and other information below:

Follow these instructions if you want to pair the Haylou S35 ANC headphones with an Android phone, iPhone or iPad:

On Android phone/tablet:

1. Make sure the headset is charged.
2. Press and hold the multi-function button for 3-5 seconds until the LED indicator light starts flashing quickly in blue and red. This means the headphone is already in pairing mode.
3. Activate your cell phone’s Bluetooth and search for available Bluetooth devices.
4. Remember to keep the headphone and Android phone as close as possible during the pairing process to avoid connection issues.
5. Look for “NC35” and select it to start pairing. If prompted to enter a password or PIN code during the pairing process, enter “0000” (four zeros).
6. Wait until the pairing is completed.
7. When pairing is complete, the LED indicator light will flash blue slowly.

On iPhone or iPad:

1. Make sure your headphones have enough battery power.
2. Press and hold the multi-function button for 3-5 seconds until the LED indicator light starts flashing quickly in blue and red. This means the headphone is already in pairing mode.
3. Activate your cell phone’s Bluetooth. To do this, go to Settings and tap on Bluetooth. If Bluetooth is disabled, slide the switch to the “On” position.
4. Search for available Bluetooth devices. Tap the name “Haylou S35” in the list of available devices. If you don’t see the name “Haylou S35”, tap “Search Devices” to refresh the list.
5. If prompted to enter a password or PIN code during the pairing process, enter “0000” (four zeros).
6. Wait until the pairing is completed. This may take a few seconds.
7. When pairing is complete, the LED indicator light will flash blue slowly.

How to pair Haylou S35 ANC on Windows or Linux computers?

Follow these instructions if you want to pair the Haylou S35 ANC headphones on your Windows or Linux computer:

On Windows:

To pair the Haylou S35 ANC headphones with Windows, follow these steps:

1. Make sure your Windows computer supports Bluetooth and is turned on.
2. Turn on the Haylou S35 ANC headphones by pressing and holding the multi-function button until the indicator light starts flashing blue and red.
3. On your Windows computer, click the Bluetooth icon on the taskbar or go to Settings > Devices > Bluetooth & other devices.
4. Click on “Add Bluetooth or another device”.
5. Select “Bluetooth” and wait for Windows to detect the Haylou S35 ANC headphone. It should appear in the list of available devices.
6. Select the Haylou S35 ANC headphones from the list and click “Connect”.
7. Wait for Windows to finish installing the driver and connect the Haylou S35 ANC headphones.
8. Once connected, you should see a “Connected” message on your computer and the indicator light on the headphones should turn blue.
9. Now you can start using the Haylou S35 ANC headphones on your Windows computer.

On Linux:

To pair the Haylou S35 ANC headphones with Linux, follow these steps:

1. Turn on the Haylou S35 ANC headphones by pressing and holding the multi-function button until the indicator light starts flashing blue and red.
2. On your Linux computer, go to the Bluetooth settings. This can vary depending on the Linux distribution you’re using, but you can usually find the Bluetooth settings in the system settings panel.
3. Make sure Bluetooth is enabled on your Linux computer. There is usually an on/off switch for Bluetooth in settings.
4. Click “Add Device” or “New Device”.
5. Linux should start looking for available Bluetooth devices. Wait until it detects the Haylou S35 ANC headphones.
6. Select the Haylou S35 ANC headphones from the list of available devices and click “Pair”.
7. Linux should prompt you to enter a PIN code. The Haylou S35 ANC headphones do not require a PIN code, so simply click “Continue” or leave the field blank.
8. Wait for Linux to complete the pairing process.
9. Once paired, the Haylou S35 ANC headphone should appear in the list of paired devices on your Linux computer.
10. Now you can start using the Haylou S35 ANC headphones on your Linux computer.

Note : If you are having trouble pairing the headphone, try restarting your computer and the headphone and try again.

How to use Haylou S35 ANC controls?

Pairing the Haylou S35 ANC is easy on Android or iOS devices. Just follow the instructions below to be able to connect it:

• To activate the game mode, double-tap the headset’s control panel.
• To access the voice assistant, triple-tap the headset’s control panel.
• To switch between noise-cancelling modes, tap the ANC button. Each tap will change the ANC mode between “ANC On”, “Transparency” and “ANC Off”.
• To increase the volume, tap the volume button.
• To decrease the volume, press and hold the volume button. The volume will be reduced by two levels per second.
• To pause/play the music or answer/end a call, tap the call button.
• To skip to the next track, double-tap the power button.
• To go back to the previous track, triple-tap the power button.
• To turn the headset on or off, press and hold the power button for 2 seconds.

How to reset Haylou S35 ANC?

If you are experiencing connection or audio issues on your Haylou S35, you can try to resolve it by performing a factory reset. Check below 3 different methods to reset these headphones:

Before starting, remove the connection in the Bluetooth section of the device to which the headset is paired.

Method 1:

• Then hold the “Volume Up” and “Volume Down” buttons simultaneously for 5 seconds.

Method 2:

• Insert the audio cable into the headphone’s audio socket, then remove it.

Method 3:

• The device will also automatically reset after being updated.

Conclusion

The Haylou S35 ANC is a great choice for anyone looking for audio quality and active noise cancellation. With this tutorial, you can easily pair your headphones with an Android phone, iPhone, Windows or Linux computer and start enjoying their functionality.

Remember to keep the headphones and Bluetooth device as close as possible during the pairing process to avoid connection issues. Now, you’re ready to enjoy an immersive, distraction-free audio experience with the Haylou S35 ANC.