Oppo Reno 8T CPH2505 Firmware Flash File & Stock ROM

- Advertisement -

The Oppo Reno 8T is a mid-range smartphone that offers great value for money. It features a 6.5-inch full HD+ display, along with an octa-core processor and up to 8GB of RAM for smooth performance.

The device has four rear cameras, including 48MP main lens and 13MP ultra wide-angle shooter, plus two 2MP sensors for depth effects and macro shots respectively. On the battery side, it packs a 4500mAh capacity that supports 65W fast charging technology so you can quickly top up your phone when needed without waiting too long to get back in action again!

If you’re looking for a reliable and efficient way to flash your Oppo Reno 8T CPH2505 smartphone, you’ve come to the right place. This article provides a comprehensive guide to help you flash the firmware of your Oppo Reno 8T CPH2505 device, along with the necessary steps to install the stock ROM.

Oppo Reno 8T CPH2505 Firmware

- Advertisement -

Why flash the firmware and install stock ROM

Flashing the firmware on your Oppo Reno 8T CPH2505 device can fix common issues like system crashes, boot loops, software errors, and other performance issues. Installing the stock ROM can also help you revert to the original state of your device in case you’ve made any changes that have resulted in these problems.

Pre-requisites for flashing the firmware

Before you start the flashing process, it is essential that you take a backup of all your important data and ensure that your device is charged to at least 50%. You’ll also need to download the latest Oppo Reno 8T CPH2505 firmware file, a USB cable, and a computer.

Firmware Information:

Device Name: Oppo Reno 8T CPH2505
ROM Type: Full ROM
SoC: Qualcomm SD695
OS: Android 13xx
Password: Null
Root Access: No
Region: Check Below List
Firmware Version: Check Below List
[quads id=2]
Downloads Links:

CPH2505export_11_A.01_2022122818250173: Download

Step by Step Guide to flash the firmware

  1. Download the latest Oppo Reno 8T CPH2505 firmware file from a reliable source and extract the contents of the zip file to a folder on your computer.
  2. Open the MSM Download software on your computer and click on the “Download” tab.
  3. Extract ROM File & tool in the same folder
  4. Install QCOM 9008 usb driver on your computer
  5. connect Phone to computer followed by this Pattern > volume up + volume down + USB cable, if no device then you have to do test point..
  6. run MSM Download tool
  7. Login with Oppo ID
  8. locate firmware ofp file
  9. Click start .
  10. wait until success,
  11. once done. unplug device and switch it ON.

Step by Step Guide to flash the firmware


By following the steps outlined in this guide, you can easily flash the firmware and install the stock ROM on your Oppo Reno 8T CPH2505 device. This can help you resolve any performance issues and restore your device to its original state. If you encounter any

- Advertisement -


Please enter your comment!
Please enter your name here