How To Unbrick OnePlus Nord Firmware In EDL Mode

Unbrick OnePlus Nord Firmware In EDL Mode

In this post, I will share all kinds of OnePlus Nord Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your OnePlus Nord software upgrade.

Why would you want to flash Firmware on your OnePlus Nord?

“OnePlus Nord Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is OnePlus Nord Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of OnePlus Nord Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

OnePlus Nord Firmware Details:

Gapps: Included
Device Supported: OnePlus Nord
Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
Processor: QCOM SD 865
Android Version: Android 10
Firmware Version: AC01BA EU – AC01AA International – AC01DA INDIAN
Password: Null

AC01BA EU Firmware: OOS 10.5.2
AC01AA International Firmware:
OOS 10.5.2
AC01DA INDIAN Firmware With tools:
OOS 10.5.2

Pre-requirements to Install OnePlus Nord Stock ROM:

  • Supported Phone: OnePlus Nord
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take OnePlus Nord Full Backup

Before going to install OnePlus Nord stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download OnePlus Nord Flash Tool And Drivers:

A.  Download and install OnePlus Nord Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as OnePlus Nord Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash OnePlus Nord Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “OnePlus Nord Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More