HomeHow ToNothing Phone 1 Root And Unlock Bootloader

Nothing Phone 1 Root And Unlock Bootloader

Nothing Phone 1 Root And Unlock Bootloader

Nothing Phone 1 Root And Unlock Bootloader: Nothing Phone 1 is a brand new mid-range phone that has recently been released on the market. It is one of the most talked-about devices in its price range ever. The new transparent design and integrated LEDs are the reasons why they are being referred to as Glyph lights. Because of the one-of-a-kind design, the phone has an upscale appearance.

If you own a Nothing Phone 1 and want to gain root access to the device, then this guide is for you. You will learn how to root the Nothing Phone 1 and how to unlock the bootloader of the Nothing Phone 1 in this article.

The smartphone’s symmetry resembles that of the iPhone 12, and the display design is also comparable. Before we proceed to the steps, let’s examine its specifications briefly. Nothing Phone 1 has a 6.55-inch display with full HD+ resolution. It has a refresh rate of 120 Hz. 50MP + 50MP rear-facing cameras and a 16MP front-facing camera. The phone also includes a Qualcomm Snapdragon 778G+ processor that has been customized for the device.

The glyph interface is its main draw. The backlights glow in response to the ringtone, wired and wireless charging, and other actions. However, manual customization of the glyph lights is not available, so you must rely on the default preset. And, as of recently, Nothing released the kernel source for the device, implying that we will soon see some customizable apps for it. However, for these types of customizations, you may need to root your phone.

How to Root Nothing Phone 1

The Nothing Phone 1 can do more than what comes with the device. But we have to wait for the custom development, which shouldn’t take too long now that the kernel source is available.

Even though it can take time, you can root your device right away to get access to features and customizations that only root users can access. But in order to root Nothing Phone 1, you must first unlock its bootloader. Let’s look at how to get the bootloader to work.

Unlock the Bootloader of Nothing Phone 1

Like other Android phones, the Nothing Phone 1 has a locked bootloader as one of its security features. It stops users from making changes to the device, like installing custom ROMs or writing to the system to root it. So, if you want to make these changes, you need to unlock the Nothing Phone 1’s bootloader. You can unlock the bootloader by doing these things.

  • Take a full backup of your Nothing Phone or a backup of the important data on it. This will make your phone start over.
  • Open the phone’s settings and click on “About Phone.”
  • Now, go to the Software Info page and look for the Build Number. To turn on Developer Options, you have to tap it seven times.
  • Go back to Settings and then to System > Developer Options.
  • Scroll down a bit to find OEM Unlocking and turn it on. Also, use the developer options to turn on USB Debugging.

Unlock the Bootloader of Nothing Phone 1

  • Install ADB and fastboot drivers on your PC. You can also use the Platform SDK Folder if you have Mac, Linux, and also Windows.
  • Now connect your phone to your PC and if it asks for USB Debugging authorization, tap Allow. And open command windows from the Platform tools location or open directly if you have installed adb drivers.
  • Enter the below command to check if the device is connected or not. It will return the device id.
    • adb devices
  • Grant permission if there is any prompt on your phone. And then enter the command again to see if it is connected.
  • Now you need to enter your phone into bootloader mode. For that enter the below command.
    • adb reboot bootloader
  • From bootloader switch to Fastboot mode using volume buttons to navigate and power button to select. While in fastboot mode, enter the given command to unlock bootloader of Nothing Phone 1.
    • fastboot flashing unlock
  • Now you will get some options on your phone, navigate to unlock bootloader and press the power button.
  • It will unlock the bootloader and reset your phone. You can now reboot the system using options in bootloader mode.

The process of unlocking the bootloader on the Nothing Phone 1 is complete. As soon as the bootloader is unlocked, root access can be gained. However, you cannot root without the necessary files and programs.

Pre-requisites

  1. Create a copy of your phone’s data.
  2. You should download the Magisk app and run it on your mobile device.
  3. Save the Nothing 1 firmware download (The same build your phone is running on)

Steps to Root Nothing Phone 1 with Magisk

  • The Nothing Phone 1 firmware contains a boot.img file; extract it and place it on your device.
  • Launch Magisk, then select Install from the menu.

You can now select “Select and Patch a File” from the menu.

  • Once you choose the boot.img file you copied earlier, the boot image patching process will begin.
  • The modified image file will be named magisk patched.img and saved in the downloads folder.
  • You can now save the updated boot image in your computer’s C:adb folder (Copy it to the platform-tools folder if you are going to use the command window from there). The modified file should be saved as boot.img.
  • Connect your Nothing Phone 1 to your computer and then reboot it into Fastboot mode. If you want to use the bootloader, just do what it says.
  • To launch the command prompt in the C:adb (or platform-tools) directory, type cmd into the address bar and hit enter You can also use the cd command to navigate to these locations (cd C:/adb, for instance).

  1. Enter the given command to flash the patched Magisk file and root Nothing Phone 1. If the location in the command window is not of the folder where the boot image is located then drag and drop boot.img after fastboot flash boot command mentioned below.
    • fastboot flash boot boot.img
  2. After flashing the patched boot image, reboot your phone. You can use the fastboot reboot command.
  3. Install the Magisk app if it’s not already installed. Now you will see Magisk installed which means your Nothing Phone 1 is rooted.

This concludes the tutorial on how to remove the bootloader and gain root access on a Nothing Phone 1. You now have access to root-required programs and personalization options.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

- Advertisment -