NOTE 10 Plus SCV45 Combination File

The specific NOTE 10 Plus SCV45 Firmware Download Package has a Stock ROM of NOTE 10 Plus SCV45. This helps bypass FRP lock and revert from root and custom ROM.

Advertisement

Samsung NOTE 10 Plus SCV45 Firmware File

There are various reasons to flash “Stock Firmware on NOTE 10 Plus SCV45“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

NOTE 10 Plus SCV45 Stock ROM Details:

AP VERSION CSC VERSION code Type OS Download
SCV45KDU1BTE3 SCV45QDI1BTE3 KDI FULL 10 Q DOWNLOAD
SCV45KDU1BTB2 SCV45QDI1BTB2 KDI FULL 10 Q DOWNLOAD
SCV45KDU1BTA5 SCV45QDI1BTA5 KDI FULL 10 Q DOWNLOAD
SCV45KDU1ASK4 SCV45QDI1ASK4 KDI FULL 9 Pie DOWNLOAD
[quads id=2]

How To Install NOTE 10 Plus SCV45 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract your computer’s NOTE 10 Plus SCV45 Firmware files.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your NOTE 10 Plus SCV45 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”NOTE 10 Plus SCV45 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using information in this guide.
  • Phone must have a 70–80% charge.