Nokia TA-1032 Firmware Flash File [Nougat ROM]

Nokia TA-1032 Firmware

Download Firmware/Flash File For Lava Z60s:

The specific Nokia TA-1032 Firmware comes with a Stock ROM of Nokia TA-1032. This helps you to bypass FRP lock and revert from the root and custom ROM.

There are various reasons to flash (Firmware on Nokia TA-1032).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

Device Name:Nokia TA-1032
Full ROM
ROM Size:up to 750 MB
Cpu type:MT6737M
Os:Android 7.0
Root access:Not
Firmware Version:
Nokia TA-1032 Firmware MT6737M 7.0
[quads id=2]
Download: Nokia TA-1032 Firmware MT6737M

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader
  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

 Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Nokia TA-1032 Flash Tool And Drivers:

A.  Download and install Nokia TA-1032 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Nokia TA-1032 Flash Tool because this tool is very efficient and support all kind of MTK phones.

Instructions to Flash Stock ROM:

Instructions to Flash Nokia TA-1032 Stock Firmware:

1. First of all Download the ‘Nokia TA-1032 flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM on your Nokia TA-1032.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.


  • Please read and understand the Full Guide before flashing “Nokia TA-1032 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.


  1. Attention: My Nokia 3 got bricked after 7.1.1 update trough zip on sd card. Already tried lots of things including factory reset but with no success. Any ideas before sending it for repair? ThanksMy Nokia 3 got bricked after 7.1.1 update trough zip on sd card. Already tried lots of things including factory reset but with no success. Any ideas before sending it for repair? Thanks

  2. I tried the update trough zip file on sd card. The update started and took about 5 seconds. The phone restarted on the recovery menu. Tried to reboot with no success. Tried factory reset and nothing helped. Left it this evening in the repair shop

  3. I got this Nokia 3 ta1020 I flashed it with sp flash tool now its dead it keep on saying aunthication file select it’s hard bricked can anyone help me pliz

Back to top button