This time I will share a tutorial on how to flash Nokia 6 TA-1003 firmware. With computers in an easy and tested way on our devices. In this article, you will find Nokia 6 TA-1003 Stock Firmware ROM. official download link flashing tutorial and flash tool. Download Nokia 6 TA-1003 stock ROM from here. Flash it in your device and enjoy the native Android experience again.
The Nokia 6 is powered by a 1.4GHz octa-core processor and it comes with 3GB of RAM. The phone packs 32GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Nokia 6 packs a 16-megapixel primary camera on the rear and an 8-megapixel front shooter for selfies.
The Nokia 6 is powered by a 3000mAh non-removable battery. It measures 154.00 x 75.80 x 7.85 (height x width x thickness) and weighs 167.00 grams.
The Nokia 6 is a Dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Compass/ Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor, and Gyroscope.
Nokia 6 TA-1003 Firmware Flash File [Nougat QFIL ROM]:
Nokia 6 TA-1003 Firmware is the software that is provided by the vendor or You may say that the software. which was installed by the manufacturer of the phone is Stock Rom. the other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory. Flash memory holds Android’s firmware. the same as most other portable devices with an embedded OS.
We will use Qualcomm QPST to unbrick the Nokia 6 TA-1003 as we use for Asus Pegasus X003. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Nokia 6 TA-1003.
The Benefit Of Nokia 6 TA-1003 Firmware:
- Flash Stock To Unbrick your Nokia 6 TA-1003.
- Flash Stock ROM solve the boot loop issue.
- Update to Android 8.x and Downgrade Nokia 6 TA-1003.
- Unroot or Fix Bugs on the phone.
- To solve the lag or stutter on Nokia 6 TA-1003.
- Fix software issues.
- Revert back to stock to get your warranty.
- To reset frp security lock on Nokia 6 TA-1003.
Nokia 6 TA-1003 Firmware Details:
- Gapps File: Included
- Device Supported: Nokia 6 TA-1003
- Tool Supported: QPST QFIL MSM and Download tool
- Processor: Qualcomm
- Os: Android Android 7.1.1 Nougat
Download: Nokia_TA-1003_MSM8937_06082017_7.1.1.zip
Download via: Google Drive – Mshare – Mega
Pre-requirements to Install Nokia 6 TA-1003 Firmware:
- Supported Phone: Nokia 6 TA-1003
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
Flashing Tool And Drivers:
- Download Qualcomm QPST. – Qualcomm Drivers.
Disclaimer:
- Please read and understand the Full Guide Before Flashing Nokia 6 TA-1003 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Instructions to Install Nokia 6 TA-1003 Firmware:
1. Download the QPST tool & driver.
2. Make sure your device is charged to at least 30%.
3. Run the QFIL tool.
4. Now Browse under the Programmer path to Chose Nokia 6 TA-1003 Firmware MBN File.
MBN File Format:
5. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6. Next Go To Load XML, select rawprogram_unsparse_without_qcn.xml and Select Patch0.xml
Load XML comes with two option:
- rawprogram_unsparse_without_qcn.xml: On choosing this file, data will not be lost.
- rawprogram_unsparse.xml: Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
8. Click on Select Port and choose the port.
9. Click on Download to start flashing.
10. Disconnect device from USB cable once Finish Download appears.
Follow Detailed Instruction Nokia 6 TA-1003 Firmware Flashing With Qualcomm QPST.
![iLovfa F508 Firmware Flash File [Stock ROM]](https://aiomobilestuff.com/wp-content/uploads/2020/03/iLovfa-A19-Firmware.png "iLovfa F508 Firmware Flash File [Stock ROM]")
![Camfone H5 Plus Firmware Flash File [Stock ROM Download]](https://aiomobilestuff.com/wp-content/uploads/2013/08/Camfone-H5-Plus-e1592226501846.jpg "Camfone H5 Plus Firmware Flash File [Stock ROM Download]")
THESE FILES DO NOT EXIST IN FIRMWARE ARCHIVE!!!!
Step 6. Next Go To Load XML, select rawprogram_unsparse_without_qcn.xml and Select Patch0.xml
Load XML comes with two option:
rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
ok then leave these files and simply add mbn firmware file and then press download.. that,s all
@Gadgetmodder – thanks for fast response… One more thing i`m not sure about… Which MBN file to select!? If i manage to setup my phone..
I`m having little difficulties for software to recognize the phone… it was stuck on boot loop and could only get into recovery but it won`t recognize any software to update from SD card, so i used another software to flash ta-1000 firmware but i would rather have it on original model firmware.. Can you help me with that?
cmnlib
cmnlib64
devcfg
emmc_appsboot
keymaster
rpm
sbl1
tz
Those are in archive…
It`s not working… No Qualcomm HS-USB QDLoader 9008 port in device manager, it just says snutdown i upper left corner on phone display and goes like that in loop when holding volume up and down… When i let go buttons, it just starts charging…. Something is missing in instructions… How to set up program!? Flat build!? Meta build!? No mbn file is recognized when going on browse, which is activated only when select Flat build! This obviously is not complete instruction.. MBN files are shown only when choosing All Files to show…
Download Qualcomm Flash Image Loader (QFIL)
QFIL_v1.0.0.2 https://androiddatahost.com/jj9ye
QFIL_v1.0.0.3 https://androiddatahost.com/fgd43
QFIL_v2.0.0.5 https://androiddatahost.com/flkn2
Download qualcomm_driver.zip https://androiddatahost.com/nbyn6
First of all uninstall your drivers and restart you pc then install these drivers.
now use these version of qfil one by one
and make sure that Qualcomm HS-USB QDLoader 9008 port is in in device manager
and wait i am downloading the stock Rom And then reply you that mbn firmware is in extracted firmware file.
1. Download firmware (all in one folder
2. You need a cable (Flash Cabel),
3. Unzip the firmware!
4. Turn off the phone
5. Connect the cable to the phone, but do not connect to the computer!
6. IMPORTANT !!! While holding down the volume and volume keys –
cut the black and green wire connect to the computer
7. Hold down the + and – keys to separate the contacts but keep the keys squeezed !!!
8. run the QFIL program and select the files from the Nokia_6 folder, BUT KEYS + and – HOLD !!!
9. Press Download and hold the keys for 5 more seconds and release.
10.The firmware will begin.
After about 5 minutes you will see a blue line of the process, when the phone is flashed, you will hear the sound of rebooting the phone.
11. Everything is ready!
P.S. If you do not hold both the + and – keys at the same time, you will get an error in the firmware process.
Ok, thanks.. Will try and let you know. Thanks again, i appreciate it..
nice work