Newman K5 Firmware Flash File Stock ROM

 

Advertisement

We are going to Flash Stock ROM on Newman K5. In this guide, we have used the SP Flash Tool to flash the Newman K5 Firmware. And we include the Official link to Download Newman K5 Stock ROM and all Needed Files.  

your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment. This article contains the Newman K5 Firmware Flash File. That will allow you to recover your Newman K5 mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

Newman K5 Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the Newman K5 as we use for Newman k18c. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Newman K5.

[quads id=2]

The Advantages Newman K5 Firmware:

  • Flash Stock To Unbrick your Newman K5
  • Fix boot loop issue
  • Update and Downgrade Newman K5
  • Unroot or Fix Bugs
  • To solve the lag or stutter on Newman K5
  • Fix software issues.
  • Return to stock for warranty coverage.

Newman K5 Firmware Details:

  • Gapps File: Included
  • Device Supported: Newman K5
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 6.0 Marshmallow

Download

[quads id=2]

Pre-requirements to Install Newman K5 Firmware:

  • Supported Phone: Newman K5
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Newman K5 Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Newman K5 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Newman K5 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Newman K5 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Newman K5 Firmware Flashing With Sp Flash Tool.