MyPhone MyX1 (MY807) Firmware [Stock ROM]

MyX1 (MY807) Firmware [Stock ROM]
MyX1 (MY807) Firmware [Stock ROM]
The specific MyPhone MyX1 (MY807) Firmware comes with a Stock ROM of MyPhone MyX1 (MY807). This helps you to bypass FRP lock and revert from the root and custom ROM.

How To Flash MyPhone MyX1 (MY807) Stock ROM:

There are various reasons to flash (Firmware on MyPhone MyX1 (MY807)).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of MyPhone MyX1 (MY807) Firmware:

  • Flash Stock ROM to unbrick your MyPhone MyX1 (MY807)
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements To Flash MyPhone MyX1 (MY807) Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • 1. Take MyPhone MyX1 (MY807) Full Backup

Before going to install MyPhone MyX1 (MY807) stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • 2. Download MyPhone MyX1 (MY807) Flash Tool And Drivers:

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Spreadtrum flash tool for as MyPhone MyX1 (MY807) Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash MyPhone MyX1 (MY807) Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the L5002-F3210-9.0-OP-V030-20191113 flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the MyPhone MyX1 (MY807) ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed MyPhone MyX1 (MY807) Stock ROM using the SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”MyPhone MyX1 (MY807) Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on MyPhone MyX1 (MY807) must have a 70–80% charge.

Bin Packet load Error When Flashing “MyPhone MyX1 (MY807) Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing MyPhone MyX1 (MY807) Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

MyPhone MyX1 (MY807) Firmware Details:

Disadvantage

Gapps: Included No Root
Device Supported: MyPhone MyX1 (MY807) No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: SP7731CEA No ADB Ad Block
Os: Android Pre-installed OEM apps

[quads id=2]

Download SP7731CEA_MY807_7.0_SP100B_MY807_MYX1_20180112_V1.06_MY807
Download MYX1_CX77xx_SPDNV.spdnv/file
Password RalphBasilio