By | March 23, 2024

Motorola Moto C XT1754 Secure Boot DA File

Format A Single Partition In Motorola Moto C XT1754 using Motorola Moto C XT1754 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Motorola Moto C XT1754 using SP flash tool.

Why would I want to format a single partition on my Motorola Moto C XT1754?

There are different causes why one might want to format a single partition on a Motorola Moto C XT1754. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Note:

Advertisements

1. open folder

2. extract flash tool and open flash tool

3. select da file in FRP folder

4. select scatter file

Advertisements

5. formate with FRP address ( 0x2d88000 0x100000 )

6. FRP done but dl image failed to show your screen

7. fix dl image failed flash with cache file job done.

FRP address
0x2d88000
0x100000

Advertisements

Requirements to format one single partition on my Motorola Moto C XT1754:

  • Supported Phone: Motorola Moto C XT1754
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Motorola Moto C XT1754 Backup:

Download Motorola Moto C XT1754 Flashing Tool And Drivers:

Motorola Moto C XT1754 Secure Boot DA File Detail:

  • File Name: S4 IX626B Boot DA
  • Device Supported: Motorola Moto C XT1754
  • Tool Supported: Sp Flash Tool

Download

How to Format a Single Partition of Motorola Moto C XT1754:

1. The steps below explain how to format a single partition of a Motorola Moto C XT1754 using the SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Motorola Moto C XT1754

Advertisements

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Motorola Moto C XT1754

4. In the windows that appear next, navigate to and select the Motorola Moto C XT1754 scatter file.

select the Motorola Moto C XT1754 scatter file

Advertisements

5. You should now be taken back to the SP flash tool window, click on the Format tab.

Motorola Moto C XT1754 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Motorola Moto C XT1754 Manual format flash

Advertisements

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Motorola Moto C XT1754 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Advertisements
Code:

Linear_start addr = Begin Address
partition_size    = Format Length
Motorola Moto C XT1754 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

Advertisements

11. Now you can boot up the Motorola Moto C XT1754.

Disclaimer:

  • Once the SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Motorola Moto C XT1754 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Motorola Moto C XT1754 stock ROM to revive the phone.
  • Avoid using a random Motorola Moto C XT1754 scatter file (even though its for your chipset) in the Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.