Mobiistar Buddy N403 Firmware File [Stock ROM]

Mobiistar Buddy N403

When it comes to a guide like how to flash Mobiistar Buddy N403 firmware, your information with flashing tools is important.

However, installing the Mobiistar Buddy N403 Stock ROM can be difficult at times when you search for the internet to unbrick Mobiistar Buddy N403. On this page, you will find information to help you prepare for flashing the Mobiistar Buddy N403.

Mobiistar Buddy N403 Stock ROM – How To Flash Guide

The Advantages Of Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software error. Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM through recovery or with SP Flash Tool.

If your Mobiistar Buddy N403 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;


Mobiistar Buddy N403 Firmware Details:

  • Gapps: Included
  • Soc: MediaTek MT6572
  • Os: Android
  • Firmware Version: Mobiistar_Buddy_N403_MT6572_V1.11_20160318
Download Firmware/Flash File

Instructions to Install Mobiistar Buddy N403 Firmware:

Download the Sp Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Sp Flash tool.

+ Guide to Install Stock ROM using Sp Flash Tool:

Download the Mobiistar Buddy N403 stock ROM zip file given above and extract it on your computer.

2. Download USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your smartphone and take away the battery (it’s removable).

Switch Off

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Firmware Flash

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

How To Flash ROM

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start the flashing process.

Press Download

9. Next, join your Android device to your computer using the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Android device.

Follow Detailed Instruction Stock Firmware Flashing With Sp Flash Tool.


  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your Mobiistar Buddy N403 Firmware before you flash a new unknown ROM.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More