MLS iQM522 Firmware Flash File Stock ROM

 

Advertisement

Official Stock ROM Firmware for MLS iQM522, in the article you Will Learn How to Install MLS iQM522 Firmware. if you own an MLS iQM522 smartphone. And want to Install Stock Firmware– Flash File on it. To unbrick or fix boot loop issue then you are on Correct Place. In the article, we Share a Step by Step Guide to Install Stock Firmware on MLS iQM522.

This article contains the MLS iQM522 Firmware Flash File. That will allow you to recover your MLS iQM522 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

MLS iQM522 Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the MLS iQM522 as we use for MLS iq talk. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your MLS iQM522.

[quads id=2]

The Advantages MLS iQM522 Firmware:

  • Flash Stock To Unbrick your MLS iQM522
  • Fix boot loop issue
  • Update and Downgrade MLS iQM522
  • Unroot or Fix Bugs
  • To solve the lag or stutter on MLS iQM522
  • Fix software issues.
  • Return to stock for warranty coverage.

MLS iQM522 Firmware Details:

  • Gapps File: Included
  • Device Supported: MLS iQM522
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6737M
  • Os: Android 6.0 Marshmallow

Download

[quads id=2]

Pre-requirements to Install MLS iQM522 Firmware:

  • Supported Phone: MLS iQM522
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

MLS iQM522 Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing MLS iQM522 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install MLS iQM522 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download MLS iQM522 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction MLS iQM522 Firmware Flashing With Sp Flash Tool.