Thursday , December 13 2018
Home / Stock Firmware / Mione 4 Firmware Flash File [Marshmallow ROM]

Mione 4 Firmware Flash File [Marshmallow ROM]

This article contains the Mione 4 Firmware Flash File. That will allow you to recover your Mione 4 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

Mione 4 Firmware Flash File [Marshmallow ROM]

The  Mione 4 is Run on Android 6.0 Marshmallow OS Powered by MediaTek MT6580 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

If your Mione 4 device is corrupt or bricked. Download Mione 4 stock firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share Mione 4 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Mione 4 and flash with any chines Mobiles flashing tool or box.

Mione 4 Firmware Flash File [Marshmallow ROM]:

We will use Sp Flash Tool to flash Mione 4 firmware as we use for Mione X2. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Mione 4.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of Mione 4 Firmware:

  • Flash Stock To Unbrick your Mione 4
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Mione 4
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Mione 4
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Mione 4 Firmware Details:

  • Gapps File: Included
  • Device Supported: Mione 4
  • Tool Supported: SP Flash Tool
  • Processor: Media-Tek MT6580

Download: Mione 4 Firmware MT6580 6.0.zip

Pre-requirements to Install Firmware on Mione 4:

  • Supported Phone: Mione 4
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:

  • Mione 4 Flash Tool: Download the latest SP Flash tool and extract it (Install)
  • Mione 4 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Mione 4 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Mione 4:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Mione 4 firmware for your phone.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Mione 4 Firmware Flashing With Sp Flash Tool.

Search Tags:
    Mione 4 Official Stock Firmware Flash Files Rom, mione flash file mtk 6580 6 0

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close