Micromax Spark Go Q409A Firmware


At some point, while using Micromax Spark Go Q409A, you’ll probably encounter a situation in which you need to flash Micromax Spark Go Q409A firmware. You might need a Micromax Spark Go Q409A stock ROM how do you make sure the flashing process goes off without a hitch?


The Micromax Spark Go is powered by 1.3GHz quad-core processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Micromax Spark Go packs a 5-megapixel primary camera on the rear and a 2-megapixel front shooter for selfies.

The Micromax Spark Go runs Android 8.1 Oreo (Go edition) and is powered by a 2000mAh. It measures 145.00 x 72.80 x 9.70 (height x width x thickness) .

The Micromax Spark Go is a Dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, Micro-USB, FM, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Accelerometer.

Micromax Spark Go Q409A Firmware Flash File [Stock ROM]:

Remember this guide is also very much needed in case of upgrade or downgrade the Micromax Spark Go Q409A Firmware on Micromax Spark Go Q409A. First of all, download the software, Smartphone Flash tool on your PC and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Micromax Spark Go Q409A. Some cases, We have bricked our Micromax Spark Go Q409A, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime.

Also if you think your Micromax Spark Go Q409A lag or has a problem, then flash the Stock ROM through the list below and save from situation. Stock Firmware does not void a warranty on the Micromax Spark Go Q409A.

Micromax Spark Go Q409A Firmware Oreo ROM [Flash File]:

We will use the SPD Download Tool to unbrick the Spreadtrum Devices With Stock ROM Flash Files as we use for Micromax canvasmagnus 2 plus. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your SPD Phone.

SPD Download Tool and it is used to Manually Upgrade or flash Spreadtrum Android Smartphone or Tablet. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use Spd Factory Update tool Flash Stock ROM first need to properly install the latest Spreadtrum Drivers.

[quads id=2]

The Benefit Of Micromax Spark Go Q409A Firmware:

  • Flash Stock To Unbrick your Micromax Spark Go Q409A
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Micromax Spark Go Q409A
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Micromax Spark Go Q409A
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Micromax Spark Go Q409A Firmware Details:

  • Gapps File: Included
  • Device Supported: Micromax Spark Go Q409A
  • Tool Supported: SPD Flash Tool
  • Processor: SPD


[quads id=2]

Pre-requirements to Install Micromax Spark Go Q409A Firmware:

  • Supported Phone: Micromax Spark Go Q409A
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Micromax Spark Go Q409A Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Micromax Spark Go Q409A Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Micromax Spark Go Q409A Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Micromax Spark Go Q409A Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Instructions to Install Micromax Spark Go Q409A Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Micromax Spark Go Q409A Firmware.pac file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Micromax Spark Go Q409A Firmware Flash File [Stock ROM]

Follow Detailed Instruction Micromax Spark Go Q409A Firmware Flashing With Spd Flash Tool.