How To Flash Meitu T8 MP1602 Firmware Stock ROM

0
151

Meitu T8 MP1602 Firmware

 

I am flashing stock firmware on Meitu T8 MP1602 using the flash tool. Step by step guide showing how to flash Meitu T8 MP1602 stock ROM File with Sp flash tool.

 

Why would you want to flash Firmware on your Meitu T8 MP1602?

There are various reasons to flash Firmware on Meitu T8 MP1602. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

The Benefit Of Meitu T8 MP1602 Firmware:

  • Flash Stock ROM To Unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • if your phone boots straight into recovery
  • Phone boots straight into its bootloader

Meitu T8 MP1602 Firmware Details:

  • Gapps File: Included
  • Device Supported: Meitu T8 MP1602
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6797
  • OS: Android 6.0 Marshmallow

Download Meitu T8 MP1602 Flash File:

Meitu T8 MP1602 MT6797 6.0.zip

Advertisment

Requirements to flash Meitu T8 MP1602 Stock ROM:

  • Supported Phone: Meitu T8 MP1602 Stock ROM
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Meitu T8 MP1602 Firmware Backup

Before going to install Meitu T8 MP1602 stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Meitu T8 MP1602 Flash Tool And Drivers:

A.  Download and install Meitu T8 MP1602 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Meitu T8 MP1602 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Meitu T8 MP1602.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Meitu T8 MP1602.

Instructions to Flash Meitu T8 MP1602 Stock ROM:

1. Download Meitu T8 MP1602 flash file zip file is given above and extracts it on your computer.

2. Download Meitu T8 MP1602 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Meitu T8 MP1602 smartphone and take away the battery (it’s removable).

Switch Off Meitu T8 MP1602

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Meitu T8 MP1602 Firmware Flash

5. As soon as SP Flash tool is launch, click on on “Download” tab.

How To Flash Meitu T8 MP1602 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Meitu T8 MP1602 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference, see the picture given below.

Select Meitu T8 MP1602 Firmware

8. Now click on on the “Download” button to start the flashing process.

Press Download For Meitu T8 MP1602 Firmware

9. Next, join your Meitu T8 MP1602 Android device to your computer using the USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Meitu T8 MP1602 Firmware Download Complete

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Meitu T8 MP1602 Android device.

Follow Detailed Instruction Meitu T8 MP1602 Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Meitu T8 MP1602.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Meitu T8 MP1602 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

LEAVE A REPLY

Please enter your comment!
Please enter your name here