Maximus IX Kane Firmware Flash File [Stock ROM]

Download Official Stock Maximus IX Kane Firmware Flash File For Maximus IX Kane. If you have Maximus IX Kane Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on a Correct Place, You have to do this by following the Below Guide.

Maximus IX Kane Firmware Flash File [Stock ROM]

Maximus IX Kane has a big battery of 4800 mAh with the processor of 1.3 GHz quad-core. It runs an upgraded version of Android 7.0 (Nougat) moreover camera section has 8MP primary camera lens on the rear with LED flash whereas secondary shooter has a 2MP lens. Memory is 8GB ROM and 1GB RAM. It is the 3G enabled device.

Maximus IX Kane Firmware Flash File [Stock ROM]:

Official Stock ROM Firmware for Maximus IX Kane, in the article you Will Learn How to Install Stock ROM – Flash File on Maximus IX Kane. if you own a Maximus IX Kane smartphone. And want to Install Stock Firmware on it. To unbrick or fix boot loop issue then you are on Correct Place. The article, we Share a Step by Step Guide to Install Stock Firmware on Maximus IX Kane.

We will use Sp Flash Tool to unbrick the Maximus IX Kane as we use for Maximus aura a77. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Maximus IX Kane.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Advantages Maximus IX Kane Firmware:

  • Flash Stock To Unbrick your Maximus IX Kane
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Maximus IX Kane
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Maximus IX Kane
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Maximus IX Kane Firmware Details:

  • Gapps File: Included
  • Device Supported: Maximus IX Kane
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6582
  • Os: Android
 Maximus IX Kane MT6582 v1.0.7

Pre-requirements to Install Maximus IX Kane Firmware:

  • Supported Phone: Maximus IX Kane
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Maximus IX Kane Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Maximus IX Kane Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Maximus IX Kane Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Maximus IX Kane Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Qmobile Evok Power Lite Firmware Flash File [Nougat ROM]

Follow Detailed Instruction Maximus IX Kane Firmware Flashing With Sp Flash Tool.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for