The specific M20 SM-M205F U2 Firmware Download Package has a Stock ROM of M20 SM-M205F U2. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung M20 SM-M205F U2 Firmware
There are various reasons to flash “Stock Firmware on M20 SM-M205F U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: M20 SM-M205F U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
M20 SM-M205F U2 Stock ROM Details:
AP VERSION | CSC VERSION | code | Type | OS | Size | google link |
M205FDDU 2 BSH3 | M205FODM2BSH3 | INS | FULL | OS9 | 2.6G | DOWNLOAD |
How To Install M20 SM-M205F U2 Stock Firmware:
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the M20 SM-M205F U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds on your phone to complete the process.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your M20 SM-M205F finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”M20 SM-M205F U2 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.