If your LK-Mobile S8 mobile has been damaged for any reason. And you want to fix it at home by flashing LK-Mobile S8 Firmware. So your search on the Internet has ended. Today I tell you the easy way to flash LK-Mobile S8 firmware. By following which you can make your phone back to work again. Yes. All the following software are free of charge in this article

LK-Mobile S8 Firmware Flash File [Stock ROM]

The LK-Mobile S8 is Run on Android 5.1 Lollipop OS Powered by MediaTek MT6580 Processor, it is a Dual SIM Smartphone Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

LK-Mobile S8 Firmware Flash File [Stock ROM]:

If your LK-Mobile S8 device is corrupt or bricked. Download LK-Mobile S8 firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share LK-Mobile S8 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of LK-Mobile S8 and flash with any chines Mobiles flashing tool or box.

We will use Sp Flash Tool to unbrick the LK-Mobile S8 as we use for LK-Mobile a98 pro. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your LK-Mobile S8.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of LK-Mobile S8 Firmware:

  • Flash Stock To Unbrick your LK-Mobile S8
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade LK-Mobile S8
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on LK-Mobile S8
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

LK-Mobile S8 Firmware Details:

  • Gapps File: Included
  • Device Supported: LK-Mobile S8
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 5.1 Lollipop
Download
LK-Mobile S8 Firmware  MT6580.zip

Pre-requirements to Install LK-Mobile S8 Firmware:

  • Supported Phone: LK-Mobile S8
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing LK-Mobile S8 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install LK-Mobile S8 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download LK-Mobile S8 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction LK-Mobile S8 Firmware Flashing With Sp Flash Tool.

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.