LG Smart TVs are gaining popularity due to their cutting-edge features, sleek design, and reasonable prices. The ability of these televisions to connect to the internet and access online content is a defining characteristic.
Nonetheless, some users have reported issues with their LG Smart TV, which indicates that WiFi is disabled. If you are among these users, you need not worry. In this article, we will provide troubleshooting steps to assist you in resolving the issue and reconnecting your TV to the Internet.
how do resolve the issue where the LG Smart TV displays Wi-Fi as off? In this guide, we will discuss the potential causes of this issue and provide a detailed solution to resolve it.
Possible Reasons for LG Smart TV Showing Wi-Fi Turned Off
There are lots of reasons why your LG Smart TV may display Wi-Fi as disabled. Several of these factors include:
- Connectivity Issues: If your TV is far from the router or if there are multiple walls between them, it may cause connectivity issues that result in Wi-Fi is disabled.
- Firmware Update: Firmware updates can sometimes cause Wi-Fi connectivity issues. If you have recently updated the firmware on your television, this may be the cause of the issue.
- If there are issues with your router, such as a weak signal, it could cause your TV to indicate that Wi-Fi is disabled.
- System Configuration: Your network configuration may be the source of the issue. It is possible that your television has not been configured to connect to your Wi-Fi network.
How to Fix LG Smart TV Showing Wi-Fi Turned Off
Power Cycle Your TV:
It’s a good idea to speed through your TV once in a while to get rid of any errors. Even if the WiFi isn’t working, knowing what the problem is could help you fix it.
- Pull the power cord out of your TV’s power source.
- Don’t plug it in for two minutes.
- Plug the power cord back into the outlet and turn it back on.
Now try to turn on the WiFi. If it still says “off,” move on to the next step.
Change Location Settings:
Several users have notified me about a new trick that involves changing the TV’s connection location at random. Yes, switching your TV’s default location from where it is to somewhere else and then back to where it is has helped many people a lot. You should also try this out.
- reached the Home or Start button on the remote for your LG TV.
- Choose the icon that looks like a gear in the upper right corner of your screen.
- Now, go to the bottom right corner and click on All Settings.
- Choose “General” from the list of options.
- Choose Location.
- Depending on the model of your TV, you will either see two locations or just one. In both cases, you need to change the location of the options to a random country and then back to your own. You will see two options: “Broadcast Country” and “LG Services Country.” If you only see one option, it will be the country where LG TV services are available.
- To change the location for both options, you need to turn off the feature that sets it automatically and then choose any random country.
- Once both are saved, go back to the same page of settings and change it back to automatic. That will put you back in the country you came from.
- Now go to Settings.
- Open all settings.
- Go to Network, and then select the WiFi network.
If the technique worked, the TV should turn on its WiFi and look for nearby networks that are open. But if your WiFi doesn’t work, you’ll see the same thing on your TV. If that’s the case, try the next solution.
Clean the WiFi Module:
This part of the guide is more about fixing things by hand, and some users have said that this worked for them. So you should definitely try this. For this method, you will have to open the back of the TV. But you don’t have to worry too much about the problems because the procedure is easy and standard.
- Put the TV on its back and open the screws that hold it together.
- Once you take out all the screws and take off the back cover, you will see the WiFi module at the bottom of the TV.
- Take off the WiFi module’s case.
- Take the part out of the case.
- Carefully remove the clip from the WiFi module’s connection ribbon.
- Clean the WiFi module’s connection slot with a Q-tip and wipe the end of the connection ribbon.
- When you’re done cleaning, put the connection ribbon back in place with the clips.
- Return the WiFi module to its case.
- Put it back on the TV with screws.
- Screw the back cover back on and tighten it again.
- Now, put on the TV.
- Go to Settings.
- Open all settings.
- Click on Network, This part of the guide is mostly about fixing things by hand, and some users have said that this worked for them. So you should try this for sure. For this method, you’ll need to open the TV’s back. But you don’t have to worry too much about the problems because the process is easy and standard. after which you choose the WiFi network.
If the technique worked, the TV should turn on its WiFi and look for nearby networks that are open. But if your WiFi doesn’t work, you’ll see the same thing on your TV. If that’s the case, try the next answer.
Set the correct date and time:
Setting the right date and time on a smart TV is important for the best connectivity.
- Reached the “Home” button. Choose the Settings menu.
- Choose the device’s settings. the Date and Time page.
- Now, look at the time and date. If it’s not set right, choose the option for automatic date and time and turn it off. Go to the option to Set Time Zone and choose the right time zone. Then turn the TV back on.
If this doesn’t work either, try the next idea.
Use an Ethernet Cable:
If there’s a chance that the WiFi module on your TV is broken, you might want to connect with a wired Ethernet cable instead. If your TV works with an Ethernet cable, you can be sure that the problem is with your WiFi module. Then you can replace it right away.
- You can use an Ethernet cable to connect your TV to your WiFi router.
- Press the button on your remote that says “Settings.” Get on the Internet.
- Choose the wired option. After a few seconds, you should see that the text is linked.
If you still don’t see it, move on to the next solution.
Factory Reset LG TV:
When you reset your TV, every setting will go back to the way it was when it was first made. It will be like the first time you bought a TV.
- Click on Settings. Choose all of the settings. Choose General.
- Scroll down until you find the option to go back to the way things were at first.
- Choose “Confirm” to confirm your action and start over.
Now, just wait for the reset to finish. When it’s done, try to use the WiFi. If it still won’t turn on, try the last solution.
Check the Wi-Fi Signal Strength
First, check how strong the Wi-Fi signal is. Make sure your TV is close to your router and that there are no obstacles between them. Move your TV closer to your router or think about getting a Wi-Fi extender if it’s too far away.
Restart Your Router
The next thing to do is to turn your router back on. Turn off your router, wait a few seconds, and then turn it back on. This should help fix any problems with the connection.
Reset Your TV’s Network Settings
If rebooting your router didn’t work, you can try resetting your TV’s network settings. Go to Settings, then All Settings, then Network, then Wi-Fi Connection, and then Advanced Wi-Fi Settings. Delete all Wi-Fi settings. Set up your Wi-Fi connection again after you’ve done this.
Update Your TV’s Firmware
If resetting the network settings on your TV didn’t work, you can try updating the firmware on your TV. Go to Settings > All Settings > General > About This TV > Check for Updates. If there is an update, you should get it and put it in.
Contact LG Support
If all of the steps above work, you can call LG support for more help. They will be able to help you figure out what’s wrong and give you a way to fix it.
In conclusion, there are many things that can cause an LG Smart TV to show that its Wi-Fi is off. You should be able to fix the problem, though, if you follow the steps in this guide. If you’re still having problems, don’t be afraid to contact LG support for more help.