Lenovo Vibe Z K910 Android 4.4.2 Firmware Flash Files

Lenovo Vibe Z K910 Android 4.4.2 Firmware Flash Files

Lenovo Vibe Z K910 Android 4.4.2 Firmware Flash Files

Readme Once: Take a Backup: If you are going to flash the above Firmware on your Qualcomm device, then take a backup of important data such as Contacts, Call logsSMS, and other data as because your personal data will be deleted after flashing the stock firmware.

1- Backup your Call Log – Contacts – Sms – Etc With G Backup

The firmware shared on this page is officially released by the company and helps you to recover your Phone if you ever got bootloop, software error, update error, hanging, Unknown Baseband, IMEI Null and dead issue.

How To Flash Lenovo Vibe Z K910 Android 4.4.2 With QPST (QFIL) Tool:

Download   Qualcomm QPST  –  Qualcomm Drivers  –  Lenovo K910 SS S 2 040 0109 131226.zip

Step 1. After Drivers installation, Attach Phone to PC via USB cable.

Step 2. While connecting to PC, the phone should be switched off and press volume up & down as boot key.

If it Create Qualcomm  HSUSB QDLoader 9008 port in device manager, the driver has been successfully installed.

Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.

Step 3. Download the QPST tool & driver.

Step 4. Make sure your device is charged to at least 30%.

Step 5. Run QFIL tool.

Step 6. Now Browse under the Programmer path to Chose MBN File.

Step 7. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.

Step 8. Next Go To  Load XML, select rawprogram_unsparse_without_qcn.xml, and Select Patch0.xml

Load XML comes with two option:

  • rawprogram_unsparse_without_qcn.xml: On choosing this file, data will not be lost.
  • rawprogram_unsparse.xml: Will lose RF Calibration data, IMEI, and WiFi/Bluetooth Address.

Step 9. Turn off the Phone and Attach it to PC by pressing Vol up & down button.

Step 10. Click on Select Port and choose the port.

Step 11. Click on Download to start flashing.

Step 12. Disconnect device from USB cable once Finish Download appears.

That’s all!

Follow Detailed Instruction How To Flash Stock Rom QPST 2.7.422 With QFIL.

Spread the love
    Lenovo Vibe Z K910 Hard Reset, Lenovo Vibe Z K910 Official Stock Firmware, Lenovo Vibe Z K910 Stock Rom Download, Lenovo Vibe Z K910 Unbrick Guide, Lenovo Vibe Z K910 Flash Files Android 4.4
 
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close