Saturday , September 18 2021

Lenovo K10 Note Firmware Flash File [Stock ROM Download]

Lenovo K10 Note Firmware

Welcome To all in one thread for Lenovo K10 Note in this post I will share all kinds of Lenovo K10 Note Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Lenovo K10 Note software upgrade.

How To Flash Lenovo K10 Note Stock ROM:

“Lenovo K10 Note Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Lenovo K10 Note Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Lenovo K10 Note Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements to Install Lenovo K10 Note Stock ROM:

  • Supported Phone: Lenovo K10 Note
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Lenovo K10 Note Full Backup

Before going to install Lenovo K10 Note stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Lenovo K10 Note Flash Tool And Drivers:
  • A.  Download and install Lenovo K10 Note Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool for as Lenovo K10 Note Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Lenovo K10 Note Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the L38111_ROW_Q00024.0_P_ROW_11.0.224_ST_191126_qpst ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.


  • Please read and understand the Full Guide before flashing “Lenovo K10 Note Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Lenovo K10 Note Firmware Details:


Gapps: Included No Root
Device Supported: Lenovo K10 Note No Twrp And Nand Backup
Tool Supported: QPST Tool – QFIL No Customization And Over cloaking
Soc: QCOM SD 865 No ADB Ad Block
Os: Android 9.0 Pre-installed OEM apps

Download Firmware/Flash File

Check Also

Lenovo Tab P11 Plus TB-J616F Firmware File

How To Flash Lenovo Tab P11 Plus TB-J616F Firmware File

If your Lenovo Tab P11 Plus TB-J616F phone is corrupt or bricked. Download Lenovo Tab …

Leave a Reply

Your email address will not be published. Required fields are marked *