Home / Stock Firmware / How To Flash Lava Iris X8 Pro Firmware File [ROM]

How To Flash Lava Iris X8 Pro Firmware File [ROM]

If you’re looking for the Lava Iris X8 Pro Firmware you need to flash, it can sometimes be difficult to locate online. For Lava Iris X8 Pro. In this Article/Tutorial about Unbrick Lava Iris X8 Pro. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Lava Iris X8 Pro Mediatek Based Devices.

Lava Iris X8 Pro Firmware

This article contains the Lava Iris X8 Pro Firmware Flash File. That will allow you to recover your Lava Iris X8 Pro mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the Lava Iris X8 Pro. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Lava Iris X8 Pro.

The Advantages Of Lava Iris X8 Pro Firmware:

  • Flash Stock To Unbrick your Lava Iris X8 Pro
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Lava Iris X8 Pro
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Lava Iris X8 Pro
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Lava Iris X8 Pro Of Firmware Details:

  • Gapps File: Included
  • Device Supported: Lava Iris X8 Pro
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MTK6580
  • Os: Android




Pre-requirements to Install Lava Iris X8 Pro Firmware:

  • Supported Phone: Lava Iris X8 Pro
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Download Lava Iris X8 Pro Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Lava Iris X8 Pro Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Lava Iris X8 Pro must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Lava Iris X8 Pro Firmware:

1. Download Lava Iris X8 Pro stock ROM zip file given above and extract it in your computer.

2. Download Lava Iris X8 Pro USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Lava Iris X8 Pro smartphone and take away the battery (it’s removable).

Switch Off Lava Iris X8 Pro

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Lava Iris X8 Pro Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

Lava Iris X8 Pro Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Lava Iris X8 Pro Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Lava Iris X8 Pro Firmware

9. Next, join your Lava Iris X8 Pro Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Lava Iris X8 Pro Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Lava Iris X8 Pro Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Lava Iris X8 Pro Firmware Flashing With Sp Flash Tool.

Check Also

Invens V4 Firmware

How To Flash Invens V4 Firmware Stock ROM

I am flashing stock firmware on Invens V4 Firmware using the flash tool. Step by …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Do NOT follow this link or you will be banned from the site!