How To Flash Kimfly M8 Firmware [Stock ROM]

 

The specific Kimfly M8 Firmware comes with a Stock ROM of Kimfly M8. This helps you to bypass FRP lock and revert form root and custom ROM.

Why would you want to flash Firmware on your Kimfly M8?

There are various reasons to flash (Firmware on Kimfly M8).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Kimfly M8 Firmware:

• Update and downgrade
• Unroot or fix bugs on the phone
• To solve the lag or stutter
• Fix software issues.
• Revert to stock to get your warranty
• Keeps rebooting issue
• If your phone boots straight into recovery
• Phone boots straight into its bootloader

Kimfly M8 Firmware Details:

• Gapps: Included
• Device Supported: Kimfly M8
• Tool Supported: SPD Flash tool or Spreadtrum Flash tool
• Soc: SPD
• Os: Android 6.0 Marshmallow

Download:

• Kimfly M8 Firmware SC7731 6.0.zip

Requirements To Flash Kimfly M8 Stock ROM:

• Charge your mobile: Your phone may no less than a half charge.
• Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Kimfly M8 Flash Tool And Drivers:

A.  Download and install Kimfly M8 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Spreadtrum flash tool for as Kimfly M8 Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Kimfly M8 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download Kimfly M8 stock ROM (PAC) file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Stock ROM using SPD Flash tool.

Disclaimer:

• Read and understand the Full Guide before flashing.”Kimfly M8 Firmware”.
• Use these instructions at your own risk.
• Before flashing, Stock ROM on must have a 70–80% charge.

Bin Packet load Error When Flashing “Stock Firmware “ If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

Advertisements

How to Write IMEI After Flashing Stock Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.