Karbonn Alfa A93 Pop Specs
Karbonn Alfa A93 Pop smartphone was launched in October 2015. The phone comes with a 4.50-inch touchscreen display with a resolution of 480 pixels by 854 pixels. Karbonn Alfa A93 Pop price in India starts from Rs. 3,390.
The Karbonn Alfa A93 Pop is powered by 1.2GHz dual-core processor and it comes with 512MB of RAM. The phone packs 8GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Karbonn Alfa A93 Pop packs a 2-megapixel primary camera on the rear and a 0.3-megapixel front shooter for selfies.
The Karbonn Alfa A93 Pop runs Android 5.1 and is powered by a 1400mAh non removable battery.
The Karbonn Alfa A93 Pop is a dual SIM (GSM and GSM) smartphone that accepts Regular and Regular. Connectivity options include Wi-Fi, GPS, Bluetooth, FM and 3G. Sensors on the phone include Proximity sensor and Accelerometer.
Karbonn Alfa A93 Pop MT6572 Official Firmware Flash Files
Please Read and understand the Full Guide Before Flashing Karbonn Alfa A93 Pop MT6572 Stock Rom.
Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
Make sure that the USB drivers for your device are installed on the computer.
Your smartphone must have a 70–80% charge.
Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
You Can Use The Following Flash Files For Upgrade Karbonn Alfa A93 Pop / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solved.
How To Flash Karbonn Alfa A93 Pop :-
- First, you need to download and extract SP flash tool and USB drivers.
- Download and install MTK android USB drivers.
- Then download Firmware file/Flash file/Rom for your phone.
- switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
- Now open SP flash tool.exe.
- When SP flash tool open, go to download button in SP flash tool.
- In download tab, click on scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in SP flash tool.
- Close SP flash tool on your computer and unplug phone.
- Power on the phone and enjoy.
- After flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction MTK Phones Flashing With Sp Flash Tool.