JioPhone Next LS1542QWN Firmware

Download Firmware/Flash File For JioPhone Next LS1542QWN:

JioPhone Next LS1542QWN Firmware: Welcome To all one thread for JioPhone Next LS1542QWN in this post I will share all kinds of JioPhone Next LS1542QWN Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your JioPhone Next LS1542QWN software upgrade.

Advertisement

“JioPhone Next LS1542QWN Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is  JioPhone Next LS1542QWN Stock ROM 

The other type of the Rom is Custom Rom which advanced users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Firmware Details:

Device Name: JioPhone Next
Type: Full ROM
Size: up to 1.3GB
SoC: QCOM SD215
Os: Android
Password: Null
Root access: Not
Gapps: Included
[quads id=2]
Download JioPhoneNext_LS1542QWN_001_04009_221021
Pre-requirements:
  • Supported Phone: JioPhone Next LS1542QWN
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take JioPhone Next LS1542QWN Full Backup

Before going to install JioPhone Next LS1542QWN stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download JioPhone Next LS1542QWN Flash Tool And Drivers:
  • A.  Download and install JioPhone Next LS1542QWN Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool as JioPhone Next LS1542QWN Flash Tool because this tool is very efficient and support all kind of Qualcomm phones.
Instructions to Flash JioPhone Next LS1542QWN Stock ROM:

How To Flash Stock ROM On JioPhone Next LS1542QWN:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the JioPhone Next LS1542QWN Firmware folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”JioPhone Next LS1542QWN Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

LEAVE A REPLY

Please enter your comment!
Please enter your name here