Galaxy J7 Prime SM-G610M U8 Firmware – G610MUBS8CTG1

Galaxy J7 Prime SM-G610M Binary 8 Firmware
The Galaxy J7 Prime SM-G610M Binary 8 Firmware Download Package has a Stock ROM of Galaxy J7 Prime SM-G610M U8 Security Patch Level 2020-06-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy J7 Prime SM-G610M U8 Android 8.1.0 Oreo – G610MUBS8CTG1

There are various reasons to flash “Stock Firmware on Galaxy J7 Prime SM-G610M U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy J7 Prime SM-G610M U8 Stock ROM Details:

Model SM-G610M Binary 8 U8, S8, Bit 8
Region / Country Brazil
Language Multi-Language
Android version Android 8 Oreo
Operator Clean ZTO (without logo, operator apps)
PDA G610MUBS8CTG1
CSC G610MZTO8CTG1
Product code ZTO
Build Date 08 Jul 2020
Security Patch Level 2020-06-01 (1 July 2020)
Size 2.2 GB
[quads id=2]
Download 4File Google Drive Android File Host

How To Install Galaxy J7 Prime SM-G610M U8 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the Galaxy J7 Prime SM-G610M U8 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you have to press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy J7 Prime SM-G610M finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy J7 Prime SM-G610M U8 Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.