J2 SM-J200BT Binary 2 Combination File - J200BTUBU2AQA1

A J2 SM-J200BT U2 Combination File is a test mode that does not have the effect of fixing the hardware but only the test function of the operation or damage.

Advertisement

However, a Combination file can recover IMEI, Baseband, or some software errors, but not all. Using a combination file will lose all features, including calls, play games, web history, and pictures. Etc.

J2 SM-J200BT Binary 2 Combination File – J200BTUBU2AQA1

Samsung combination firmware (Samsung factory binary) and Samsung official firmware are provided in similar file names with little difference. Samsung combination firmware is being provided for repair at Samsung service, and Samsung official firmware is being used for normal usage by smartphone users.

The Advantages Of Combination File:

  • The technician or the developer can thoroughly read and test the device’s equipment, which is considered the service menu.
  • Downgrade Your device and install software system Android version older than the current version.
  • Unlock the device protection with the Google Account Google FRP.
  • Fix the Root device key-DRK problem.
  • Fix the problems of stopping the Samsung device in the Recovery Mode.
  • Fix the problems of stopping Samsung devices in the Samsung logo.
  • Fixed problems with the IMEI serial number.

Pre-requirements:

J2 SM-J200BT U2 Combination File Details:

Model SM-J200BT
Language Multi / Language
Android version Android 5.1 Lollipop
PDA J200BTUBU2AQA1
Date January / 2017
Revision 1
Size 320 MB
[quads id=2]
Downloads 4File Google Drive Android File Host

How To Install J2 SM-J200BT U2 Combination File:

Download the Odin and Samsung USB Driver on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Combination File

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the J2 SM-J200BT U2 Combination File files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold the Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Once Odin detects your device, click the PDA button and select the J2 SM-J200BT U2 Combination File.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Combination File process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Read and understand the Full Guide before flashing.”J2 SM-J200BT U2 Combination File.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Before flashing, the Combination File on J2 SM-J200BT U2 must have a 70–80% charge.