Home / Stock Firmware / IVOOMI Me 3 MT6737M Android 7.0 Official Stock Firmware Flah Files

IVOOMI Me 3 MT6737M Android 7.0 Official Stock Firmware Flah Files

IVOOMI Me 3 MT6737M Android 7.0 Official Stock Firmware Flah Files

 

iVoomi Me 3 MT6737M Android 7.0 Official Stock Firmware SP Flash Tool Files

Please Read and understand the Full Guide Before Flashing IVOOMI Me 3 Stock Rom.

Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.

Make sure that the USB drivers for your device are installed on the computer.

Your smartphone must have a 70–80% charge.

Make a backup copy of important data such as call logsSMS, and other data, it is to if something goes wrong, your data is not affected.

 

You Can Use The Following Flash Files For Upgrade IVOOMI Me 3 Android 7.0 Nougat / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom IMEI Null or Unknown Baseband Problems Can Be Solved.

 

How To Flash IVOOMI Me 3 :-

Download  IVOOMI Me 3 Files.zip    MTK  android USB drivers.     SP Flash Tool.

  1. First, you need to download and extract SP flash tool and USB drivers.
  2. Download and install MTK  android USB drivers.
  3. Then download Firmware file/Flash file/Rom for your phone.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In download tab, click on scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug phone.
  12. Power on the phone and enjoy.
  13. After flashing process starts, it might take up to 510 minutes. So keep patience and wait.

Follow Detailed Instruction MTK Phones Flashing With Sp Flash Tool.

    ivoomi iv 501 flash file, ivoomi iv 501 firmware, ivoomi me3 firmware, ivoomi iv 501 flash file download, ivoomi iv 501 flash file for sp tool
You May Also Like

12 comments

  1. good unbrick guid thanks for flash files

  2. bootloop after flash what to do plz helip

  3. After flashed, camera is showing mirror mode, how can fix it,

  4. did you hard reset after flashing this rom

  5. there is no problem in this rom plz chekc your hardware

  6. really nice work thanks

  7. nice work keep it up thanks

  8. now its easy to flash mobile at home thanks .

  9. thanks looking for this

Leave a Reply

Your email address will not be published. Required fields are marked *

Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close