How To Flash Itel S11 Pro Firmware File [Stock ROM]

If you have an Itel S11 Pro smartphone and you want Itel S11 Pro Firmware. To solve your bricked device, then you definitely are in the best article/post.

We will guide for you to install the official Itel S11 Pro Stock Firmware on the device. This step is simple and straightforward to follow. We have listed the Itel S11 Pro Flash File below. Download the Stock ROM file to repair your Itel S11 Pro.

Itel S11 Pro Firmware

Remember this guide is also very much needed in case of upgrade or downgrade the Itel S11 Pro Firmware on Itel S11 Pro. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Itel S11 Pro. Some cases, We have bricked our Itel S11 Pro, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime.

Also if you think your Itel S11 Pro lag or has a problem, then flash the Stock ROM through the list below and save from situation. Stock Firmware does not void a warranty on the Itel S11 Pro.

We will use Sp Flash Tool to unbrick the Itel S11 Pro as we use for AlldoCube M5S. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Itel S11 Pro.

[quads id=2]

The Advantages Itel S11 Pro Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • Fix software issues.
  • Return to stock for warranty coverage.
  • Flash full ROM if an error in itel s11 pro hard reset or frp bypass

Itel S11 Pro Flash File Details:

  • Gapps File: Included
  • Device Supported: Itel S11 Pro
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 8.1 Oreo

Download itel s11 pro flash file without password:

Itel S11 Pro Firmware MT6580

[quads id=2]

Pre-requirements to Install Itel S11 Pro Firmware:

  • Supported Phone: Itel S11 Pro
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Itel S11 Pro Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Itel S11 Pro Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Itel S11 Pro Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Itel S11 Pro Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

itel s11 pro flash file

Follow Detailed Instruction Itel S11 Pro Firmware Flashing With Sp Flash Tool.

About Awais Jugno