Itel Prime 4 IT 1704 Firmware File [Stock ROM]

Itel Prime 4 IT 1704

Itel Prime 4 IT 1704 Firmware File [Stock ROM]

Itel Prime 4 IT 1704

Official Stock ROM Firmware for Itel Prime 4 IT 1704, in the article you Will Learn How to Install Itel Prime 4 IT 1704 Firmware. if you own a Itel Prime 4 IT 1704 smartphone. 

And want to Install Stock Firmware- Flash File on it. To unbrick or fix the boot loop issue then you are on Correct Place. The article, we Share a Step by Step Guide to Install Stock Firmware on Itel Prime 4 IT 1704.

Itel Prime 4 IT 1704 Firmware Flash File [Stock ROM]

There are various reasons to flash (Firmware on Prime 4 IT 1704).


For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Firmware:

  • Flash Stock ROM to unbrick your Prime 4 IT 1704
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements To Flash Itel Prime 4 IT 1704 Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Itel Prime 4 IT 1704 Full Backup

Before going to install Itel Prime 4 IT 1704 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.


How To Backup Android Phone Before Flashing Stock Firmware

2. Download Itel Prime 4 IT 1704 Flash Tool And Drivers:

A.  Download and install Itel Prime 4 IT 1704 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.


B. We use the Spreadtrum flash tool for as Itel Prime 4 IT 1704 Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Itel Prime 4 IT 1704 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download iTel_Prime_4_SC7731_V017_20180601_7.0 file.

3: Extract Spreadtrum Upgrade Tool on your computer.


4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Itel Prime 4 IT 1704 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.


8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Itel Prime 4 IT 1704 Stock ROM using SPD Flash tool.



  • Read and understand the Full Guide before flashing.”Itel Prime 4 IT 1704 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on Itel Prime 4 IT 1704 must have a 70–80% charge.

Bin Packet load Error When Flashing “Itel Prime 4 IT 1704 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Itel Prime 4 IT 1704 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Itel Prime 4 IT 1704 Firmware Details:


Gapps: Included No Root
Device Supported: Itel Prime 4 IT 1704 No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: SC7731 No ADB Ad Block
Os: Android 7.0 Pre-installed OEM apps
Get Link

Born as techie and was always focused on Android, ever since the HTC Dream was introduced. The abundance of options at his disposal in the open-source environment always seemed to pique his interest. "Blogger by choice, MBA by trade."
Back To Top