Itel A45 Secure Boot DA File [Auth File]

Format A Single Partition In Itel A45 using Itel A45 Secure Boot DA File. This is a step by step guide showing how to format a single partition of an Itel A45 using SP flash tool.

Itel A45 Secure Boot DA File

Why would I want to format a single partition on my Itel A45?

There are different causes why one might want to format a single partition on an Itel A45. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Itel A45:

  • Supported Phone: Itel A45
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Itel A45 Backup:

Download Itel A45 Flashing Tool And Drivers:

Itel A45 Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Itel A45
  • Tool Supported: Sp Flash Tool

Download

Itel A45 DA .rar

Itel A45 DA .zip

Itel A45 Auth .zip

How to Format a Single Partition of Itel A45:

1. The steps below explain how to format a single partition of an Itel A45 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Itel A45

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Itel A45

4. In the windows that appear next, navigate to and select the Itel A45 scatter file.

select the Itel A45 scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

Itel A45 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Itel A45 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Itel A45 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:
Linear_start addr = Begin Address
partition_size    = Format Length
Itel A45 addr and partition_size
10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Itel A45.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Itel A45 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Itel A45 stock ROM to revive the phone.
  • Avoid using a random Itel A45 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.
You might also like

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More